Push Start Button - 6G Celicas Forums

Welcome Guest ( Log In | Register )

Push Start Button, electrical diagram - check please

Dec 27, 2009 - 10:09 PM
pittfirefighter View Member Profile Enthusiast Joined Oct 10, '06 From Greensburg,PA Currently Offline Reputation: 27 (94%)	Ok so i got my button in! but i need someone to verify that this will work... Red box is a 12V source that gives 9-14V when the car is on and Running (W on ecu, 5th pin on 2nd harness) push it once with clutch in should start the car... push it again should turn the car off push switch is a momentary switch - it does not stay locked in position all relays are in their open positions This post has been edited by pittfirefighter: Dec 27, 2009 - 10:18 PM -------------------- Breaking Axles...

Replies

Dec 29, 2009 - 11:12 AM
pittfirefighter View Member Profile Enthusiast Joined Oct 10, '06 From Greensburg,PA Currently Offline Reputation: 27 (94%)	thank you very much... the idea was that relay #4, in theory, would keep the car from cranking when it was on (including turning off)... i will be able to now eliminate relay #4 and run the starter relay off of the ign wire as recommended... the idea is that the clutch out will be ACC/IGN mode while clutch in would go to START -------------------- Breaking Axles...

Posts in this topic

pittfirefighter Push Start Button Dec 27, 2009 - 10:09 PM

BloodyStupidDavey QUOTE (pittfirefighter @ Dec 28, 2009 - ... Dec 28, 2009 - 7:27 AM

pittfirefighter QUOTE (BloodyStupidDavey @ Dec 28, 2009 ... Dec 28, 2009 - 10:23 PM

sincerelyseb D.I.Y Immobiliser Immobiliser Dec 28, 2009 - 7:33 PM

pittfirefighter ok just researched latching relays... seems i lear... Dec 29, 2009 - 6:27 AM

pittfirefighter updated diagram Dec 29, 2009 - 10:08 AM

BloodyStupidDavey QUOTE (pittfirefighter @ Dec 29, 2009 - ... Dec 29, 2009 - 10:52 AM

pittfirefighter thank you very much... the idea was that relay #4,... Dec 29, 2009 - 11:12 AM

BloodyStupidDavey QUOTE (pittfirefighter @ Dec 29, 2009 - ... Dec 29, 2009 - 11:28 AM

pittfirefighter yes one could over crank the starter by holding th... Dec 29, 2009 - 11:34 AM

soulshadow Why not just have an off and on button and make yo... Dec 29, 2009 - 8:12 PM

pittfirefighter that takes away from the fun of a push start! ... Dec 30, 2009 - 12:16 AM

2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)

0 Members:

Display Mode: Switch to: Standard · Switch to: Linear+ · Outline

Time is now: November 28th, 2024 - 7:39 PM