6G Celicas Forums

Welcome Guest ( Log In | Register )

> Push Start Button, electrical diagram - check please
post Dec 27, 2009 - 10:09 PM
+Quote Post
pittfirefighter



Enthusiast
*****
Joined Oct 10, '06
From Greensburg,PA
Currently Offline

Reputation: 27 (94%)




Ok so i got my button in! but i need someone to verify that this will work...

Red box is a 12V source that gives 9-14V when the car is on and Running (W on ecu, 5th pin on 2nd harness)



push it once with clutch in should start the car... push it again should turn the car off

push switch is a momentary switch - it does not stay locked in position

all relays are in their open positions

This post has been edited by pittfirefighter: Dec 27, 2009 - 10:18 PM


--------------------
Breaking Axles...
 
Start new topic
Replies
post Dec 29, 2009 - 11:34 AM
+Quote Post
pittfirefighter



Enthusiast
*****
Joined Oct 10, '06
From Greensburg,PA
Currently Offline

Reputation: 27 (94%)




yes one could over crank the starter by holding the button down... but it would not be any different then holding the key to the furthest position... there will not be enough time in shutdown to both engage the starter and crank it

they are not even close to being affordable nor workable with this celica nor stylish...

i am implementing the nissan push start button (best looking in my opinion) with keyless use

my total will be less than $100

This post has been edited by pittfirefighter: Dec 29, 2009 - 11:35 AM


--------------------
Breaking Axles...

Posts in this topic


Reply to this topicStart new topic
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: December 1st, 2024 - 7:02 AM