huge boost leak, but can't find it Options

[xnightsmokex]

I have a boost leak on my 93 mr2 turbo, but I can't seem to find it. I just replaced my timing belt and such, and I also installed a new intercooler and piping. All of the couplers are on the piping correctly, and the t-bolt clamps are tight, but it's still leaking under boost. It's extremely loud when I boost, almost sounds like a waterfall. And when I press in on the clutch, it sounds like I have a HKS SSQV, when in reality, I still have the stock blow off valve that dumps back into the intake. It will boost some, but when the turbo builds any amount of pressure, it's really loud. This happened once before when one of my couplers wasn't tightened down, but everything is in place. Any thoughts?

[OOBE]

Intake manifold gasket? Check it. If you want to save troubleshooting. there a kit for testing boost leaks, or you can make your own. My tuner took a piece of aluminum pipe and welded a cap and a fitting to one end, so he pushes compressed air into the system and therefore can detect any boost leaks.