Another 7th gen airbag splice question |
Another 7th gen airbag splice question |
Jan 10, 2010 - 8:15 PM |
|
Enthusiast Joined Feb 7, '07 From Portland, Oregon Currently Offline Reputation: 67 (96%) |
I'm swapping my 4 spoke wheel for a 3 spoke wheel, and the airbag connectors of course don't match up. The wires from the connector that runs to the airbag module are blue and yellow. If I used the multimeter right, I've determined blue is power and yellow is ground.
The wires on the wheel connector are red and black though. I would assume that red is power and black is ground, but when I connected them the airbag light stayed on, so I switched it and ducked, no airbag deploy but the light is still on. Can anyone confirm if the 7th gen airbag connector is indeed red for power and black for ground? And if so, do I need to reset the airbag ECU after splicing in the connection? Thanks -------------------- |
Jan 25, 2010 - 4:20 PM |
|
Enthusiast Joined Aug 29, '08 From AZ, US Currently Offline Reputation: 21 (100%) |
hope this helps..
gen7 gen6 |
Lo-Fi Version | Time is now: November 27th, 2024 - 4:20 AM |