grinding near break assy, intresting issue~ Options

[D-Man]

Okay; so check this out;

it didn't happen first thing after the swap; but slowly emerged (within a week). quietly at first; but now it's getting really fcuking loud. I've already droped the tire and reallined the break/dust shield several times, (not the issue); then (remembering the D/S rotor conversion) i've swaped the pads arround (thinking they could be backwards), cleaned em (they had alot of debreis, but that may be unrelated) I've re-positioned the clips; i've remounted the tire a few times... (*NOTE: i have replaced the missing lugnuts the swap-shop fcuking lost...) yet this problem persists...

last though is that maybe there is insufficient grease in the hub boot where it hits the bearing?

here guys, listen for yourselfs!!

(only watch the first few seconds of this first one, afterwords, we're making our plan and my photographer was oblivious to the "end-video" key. enjoy our conversation... lol)

http://www.youtube.com/watch?v=arIU_KJy6H4
http://www.youtube.com/watch?v=I1vdpGx6ZkQ

IDEAS?!?!

[easternpiro1]

you were talking to your girl (beyotch?) so nicely in that im getting impatient but i dont wanna be in the dog house sort of way lol!!!


anywho, that sounds more like a creaking noise rather than grinding, i would say wheel bearing, but when mine was bad it sounded more like grinding.... it cant be anything else but something on the inside of hub since u checked everything else in the area