amp keeps blowing fuses, help |
amp keeps blowing fuses, help |
Feb 9, 2010 - 8:18 PM |
|
Enthusiast Joined Oct 7, '09 From Northern kentucky Currently Offline Reputation: 8 (90%) |
ok so i have a 500 watt amp which has worked fine for me the past few months, now i should say that when i first installed the amp it was all run down the drivers side of the car, i had the alternator hum so i bought a ground loop isolator to fix this, it worked and i left it at that. now today i got my new rear speakers, so i had to pull all of the back of the car out to install them, and i figured while i was at it i should pull the rca cables back to the head unit and run them down the passanger side. so i get all this run and i hooked the rca cables into the back of the stereo, i left the ground loop isolator still hooked up to the grounds but didnt use it, so the amp keeps blowing fuses as soon as it is turned on, can anyone help me out with this
-------------------- 1996 Toyota Celica Project Mean Green
3RD Gen 3SGTE WRC Edition W/LSD E153 - Love BOOST <3 2001 Solar yellow Lexus IS300 2001 Dodge ram 1500 Off-road edition |
Feb 9, 2010 - 9:28 PM |
|
Enthusiast Joined Feb 10, '03 From Connecticut Currently Offline Reputation: 11 (100%) |
Sounds like a short. You should check all your wiring.
This post has been edited by Supersprynt: Feb 9, 2010 - 9:28 PM -------------------- |
Lo-Fi Version | Time is now: December 1st, 2024 - 1:34 AM |