 Invader FB Doesnt fit! :( pics, pics up. |
 Feb 5, 2010 - 7:24 PM
|
 
|
 Enthusiast  Joined Mar 16, '09 From New York Currently Offline Reputation: 23 (100%)  |
Ok I dont have much experience in "body work". But I know enough to do this. I installed the rear and it was no problem really had to fill a small gap, shave off a little, I mean I know how to do this. And the SS are fitted now, just not installed.
Size of the original high beam and how much needed to be cut out (the whole still is not even big enough as there is not enough just straight up material to cut off.  Pass- The curve of the low beam is very different from the kit, and allows it only to close that much while the other side looks like the pic below this one-  getting as close as I can (alos bolted one side after this and still no luck)  Showing the top, its about 3" away from being able to bolt in anywhere on top, and it can be pushed in because of the high beams not fitting, kit not being wide enough and the different shape of the low beams  So I was trying to get the FB fitted, and the damn thing just doesnt fit! I even took off the crash bar to see if it would help and it didnt  . It looks like the whole thing is just to small! The high beams holes were about 1 1/2"too small so I cut it out and they still, well everywhere! it just doesnt fit, the low beams are too high and the kit covers 1/4 of them..... also at doesnt even reach the 5 bolt holes under the hood I dont know what to do? Should i bring it to a body place? I mean I feel pretty confident it just doesnt! fit. (idk what they could do at a body shop... or should I try to return it? I will post pics in a few mins, but idk what to do very upset
This post has been edited by mgnt232: Feb 17, 2010 - 9:59 PM -------------------- I've spilt my heart into this car :) And I don't ever plan to stop  - 6GC for Life - >Semper Fi< 1994 Cupra :p 3sgte 1995 Celica ST DD 1969 Chevelle SS alllll balls. P2 approved! |
 |
Replies
|
Feb 14, 2010 - 7:59 PM
|
|
 Enthusiast Joined Jul 13, '09 Currently Offline Reputation: 9 (91%) |
i never had this problem, mine went straight on but when i was at the Foty meet i saw one of the guys has a problem that sounds similar to your discription, see the pic below....
 not sure what you do to fix it, sorry -------------------- You're here for a good time, not a long time. - Colin McRae When in doubt... Flat out! - Colin McRae Understeer is when you hit the wall with the front of the car. Oversteer is when you hit the wall with the rear of the car. Horsepower is how fast you hit the wall. Torque is how far you take the wall with you.... |
|
Feb 15, 2010 - 1:46 PM
|
|
|
Enthusiast Joined Mar 16, '09 From New York Currently Offline Reputation: 23 (100%) |
Yeah i dont know, I tried to bolt it on one side, and kinda of strecth it to the other, cut out the lights (alot) and it doesnt reach to the top bolts at all, it is like 3" off from where the top bolts would be. It just doesnt fit right... oh welll
going to buy anotherQUOTE (ajmorris1977 @ Feb 14, 2010 - 8:59 PM)  i never had this problem, mine went straight on but when i was at the Foty meet i saw one of the guys has a problem that sounds similar to your discription, see the pic below.... not sure what you do to fix it, sorry -------------------- I've spilt my heart into this car :) And I don't ever plan to stop - 6GC for Life - >Semper Fi< 1994 Cupra :p 3sgte 1995 Celica ST DD 1969 Chevelle SS alllll balls. P2 approved! |
Posts in this topic
mgnt232 Invader FB Doesnt fit! :( pics Feb 5, 2010 - 7:24 PM
Malek idk if this will help any but my splitters had tha... Feb 5, 2010 - 10:01 PM
mgnt232 haha yeah that pic was from last summer, just grad... Feb 6, 2010 - 1:31 AM ajmorris1977 QUOTE (mgnt232 @ Feb 6, 2010 - 1:31 ... Feb 6, 2010 - 12:35 PM ajmorris1977 yep mine was the same way, it doesn't look to ... Feb 5, 2010 - 10:57 PM mgnt232 yeah the gap closed most of the way on the passeng... Feb 6, 2010 - 5:50 PM ajmorris1977 QUOTE (mgnt232 @ Feb 6, 2010 - 6:50 ... Feb 6, 2010 - 6:34 PM mgnt232 No its not pushing against , just barely touching,... Feb 6, 2010 - 7:22 PM ajmorris1977 it looks about the same as mine did so yes it will... Feb 6, 2010 - 7:33 PM 97toyotacelicagt i have a huge gap on my bumper,thats why im taking... Feb 6, 2010 - 9:09 PM joehernandez well i really hate the invader body kit,
it just s... Feb 7, 2010 - 4:49 AM mgnt232 Thanks! it was hard! lol And the invader k... Feb 8, 2010 - 3:07 PM ajmorris1977 ok here is some close ups of mine.... Feb 7, 2010 - 3:12 PM D-Man QUOTE (mgnt232 @ Feb 5, 2010 - 6:24 ... Feb 7, 2010 - 3:46 PM mgnt232 haha well Yes im going to be getting rid of the pr... Feb 8, 2010 - 3:13 PM D-Man QUOTE (mgnt232 @ Feb 8, 2010 - 3:13 ... Feb 8, 2010 - 8:33 PM ajmorris1977 yes i did, i removed mine as it would not sit righ... Feb 8, 2010 - 3:18 PM mgnt232 Can it be removed? I posted on here and they said ... Feb 9, 2010 - 5:19 PM ajmorris1977 here are a few pics...
i have had never had ... Feb 9, 2010 - 7:30 PM jordisonjr I really hope you don't use that liner stuff ... Feb 8, 2010 - 7:19 PM 96stgreendemon ^^ wow thats stupid why would you ever remove your... Feb 9, 2010 - 10:01 PM ajmorris1977 QUOTE (96stgreendemon @ Feb 9, 2010 - 10... Feb 9, 2010 - 10:43 PM SlvrCelica09 QUOTE (96stgreendemon @ Feb 9, 2010 - 10... Feb 14, 2010 - 9:58 PM johnnehh You could just modify your crash bar to make it fi... Feb 9, 2010 - 10:46 PM 96stgreendemon exactly, you could modify a crash bar with nothing... Feb 10, 2010 - 8:33 AM mgnt232 So should I cut my crashbar, or try and sand myFB ... Feb 10, 2010 - 10:46 AM 96stgreendemon ^^ yes thats exactly what you should do, driving a... Feb 10, 2010 - 11:07 AM mgnt232 Yeah ill be keeping the crashbar in mine. Ill do t... Feb 12, 2010 - 11:56 AM 96stgreendemon good to hear, never really been a fan of that body... Feb 12, 2010 - 12:01 PM yarik83 blind leading a blind. you guys are just awesome. ... Feb 14, 2010 - 6:38 PM 95CelicaST Perhaps if you want a kit that is going to fit rig... Feb 15, 2010 - 12:15 AM richee3 QUOTE (95CelicaST @ Feb 15, 2010 - 1... Feb 15, 2010 - 1:59 PM mgnt232 lol I knew it wasn't going to fit great, but e... Feb 18, 2010 - 12:07 PM yarik83 Before buying anything post pics of everything fro... Feb 15, 2010 - 5:00 PM |
14 User(s) are reading this topic (14 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: January 11th, 2025 - 3:57 AM |