6G Celicas Forums

Welcome Guest ( Log In | Register )

> 3sgte swap , got spark, wont fire , 94 gt
post Feb 26, 2010 - 9:16 PM
+Quote Post
pxcr440

Enthusiast
***
Joined Sep 6, '03
From hudson ,iowa
Currently Offline

Reputation: 1 (100%)




ok so i got my harness back fron dr. tweak and everything went together fine, i went to start the car and i it wont fire, it has spark, but doesnt seem to fire, i have fuel to the rail and if you give it a small shot of startign fluid it fires right up. checked the number one injector plug and only seems to get .6 volts while cranking , risitstor pack? or ecm unhappy , anythought would be great , thank s
 
Start new topic
Replies
post Feb 26, 2010 - 9:54 PM
+Quote Post
lagos



Enthusiast
*****
Joined Aug 31, '02
From Philadelphia, PA
Currently Offline

Reputation: 8 (100%)




There is a ground wire from the main harness to the back of the intake manifold. Supplies ground to the injectors, ecu..etc.. make sure you connected it.



--------------------
15PSI - 30MPG - Megasquirt Tuned
post Feb 26, 2010 - 9:57 PM
+Quote Post
pxcr440

Enthusiast
***
Joined Sep 6, '03
From hudson ,iowa
Currently Offline

Reputation: 1 (100%)




QUOTE (lagos @ Feb 27, 2010 - 3:54 AM) *
There is a ground wire from the main harness to the back of the intake manifold. Supplies ground to the injectors, ecu..etc.. make sure you connected it.

i remember putting it on but i will take it off clean it up and try it again,

Posts in this topic


Reply to this topicStart new topic
3 User(s) are reading this topic (3 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: February 21st, 2025 - 4:22 PM