Molded Rear Invader-, 3rd brakelight design-red gauges-decals- Options

[mgnt232]

So I decided to try and mold my RB because the sides had a 1/2" gap and a 1" gap! Keep in mind, my bodywork experience... well I dont have any lol. (and the whole car is getting repainted, this is just temp so its not too ugly)
Thanks to AJ for the info and help all the way again
here goes nothin-

...Beginning Sanding...

Bondo was nervous lol---

Got is pretty well, and primed and painted

Went back and sanded down and tried to smooth some edges down. (its just shiny because my car is very dirty, and it has clear coats on it. Thats what the whole kit looked like when i first did it. Just all needs a good 'ol dust cover lol)

Another

Started the worse side, getting a hand of the bondo (I did sand alot more to the metal)

Painting...

Finished for now, I think it turned out pretty good for never using the stuff before lol

Now for the 3rd brake light design, thanks to barterj and spy00005 for the idea

Unlit-

Lit up-

Did my gauges red the other day, working on the red turns friday

WOO!! my fav. part of the day actually was seeing how great these decals looked (I do have a mechman 250amp alt)

Unveiling

Drivers side

Passengers Side

So thats where she sits now.

Sorry for the bad quality pics all with my phone, will have my friend (who works for a photography company) take some good ones before the NJ meet sat!
tell me what you think

This post has been edited by mgnt232: Mar 17, 2010 - 7:46 PM

[Spider77]

Well, I dont really know if you can fill in voids with fg on metal. Bondo maybe? As far as surface rust, sand it down, and put primer/paint on it (anything really that will keep the bare metal from being exposed)....Id go into the whole anode/cathode thing, but its late.
I did use some rust remover/primer stuff (royal something...) on my rotors and it worked fine..not super great, but ok.