I dunno wat happened.help please..., Blown head gasket??? |
I dunno wat happened.help please..., Blown head gasket??? |
Feb 26, 2010 - 9:46 PM |
|
Enthusiast Joined Aug 8, '09 From Fiji Currently Offline Reputation: 0 (0%) |
Ok,so on my way home from classes today,i stopped at a roundabout,brakes down.when i lifted my leg to give the car gas,the car rolled back and i realised it the engine turned off.i hear horns blering behind me so i started the engine.it started with a roar compared to the usual grunt.checked my gauges and saw that the temperature had gone wayyy up(on the red line)so i rushed to a parking spot in like 45sec,turned of the motor,popped the hood and saw the radiator cap slightly unscrewed and coolant all over the place.thought i had blown the radiator.opened the cap and saw NO COOLANT.ok,i was glad to have stopped the car so i called my dad up and told him.he told me to stay there while he was bringing water for the radiator.on his arrival along with my elder brother they filled the radiator with water.it took like 5 litres im guessing.so yer,my brother told me to start the motor.being the total pain in the butt he is,he dragged me over and kept telling me that i had not closed the radiator cap properly.i told him time and again that i had and checked it twice.owk,on starting the car,the water started boiling and forming bubbles.the response i got was that the head gasket was a goner.is it true??because after that,when they were done filling in water,we drove back home and it was like a 20min drive.nothing happened.no radiator leaks or stuff like that.i stress that the car runs the way it used to and i drive it daily.im just looking to wat could have been the problem??and if there could be any other problem i could face later if something went wrong during that incident???or maybe any sound or pins or anything like that that could tell me what needs to be changed.i could take it over to a mechanic but the ones that i know of are what one would call butcher-mechanics.and their bills are downright EXPENSIVE so i'd rather check for problems myself and fix it if i can.any help would be deeply appreciated...
|
Feb 27, 2010 - 5:42 PM |
|
Enthusiast Joined Feb 5, '10 From ireland Currently Offline Reputation: 0 (0%) |
Hi there
first of all you should check that there is no oil in the rad if the rad is fizzing up then you will need to check if it is carbon from the engine there is a sniff tester out there that is cheap to buy called universal block tester you could probably pick one up off ebay or you local motor store and is simple to use it will let you know if the head gasket is gone through from the cylinder to the cooling system as not all head gaskets go from the cooling system to the oil so saying that it's not gone if the oil is black is not true but if the oil is a milky color then it is gone hope this helps http://cgi.ebay.com/ebaymotors/Engine-Bloc...omotiveQ5fTools |
Lo-Fi Version | Time is now: January 10th, 2025 - 3:48 PM |