 Need help- 94 Celica ST CV joint stuck in transaxle |
 Feb 28, 2010 - 8:10 PM
|
 
|
|
Enthusiast Joined Feb 28, '10 From Oregon Currently Offline Reputation: 0 (0%)  |
I am attempting to remove the CV joints from the transaxle and they are not coming out. They are not the flanged CF joints, they are the splined inner ends and mymanual says they should just come out easily. Well they are not. I have pounded, yanked, tapped, tried everything, they are not coming out. Is there a snap ring or something that I'm missing? Help!
'94 with a 7A-FE and manual trans. This post has been edited by Lord_Samwise: Feb 28, 2010 - 8:15 PM |
 |
Replies
|
Feb 28, 2010 - 9:28 PM
|
|
|
Enthusiast  Joined Mar 11, '06 From Way South Chicago Currently Offline Reputation: 0 (0%) |
maybe merry and pippin can help you?
you need to give it a whack with a dead blow dead on to pop it off and there probably is a snapring. but everyone is right, you're probably better off getting the whole axle unless you've got low miles and just are replacing a leaking boot. -------------------- |
Posts in this topic
Lord_Samwise Need help- 94 Celica ST CV joint stuck in transaxle Feb 28, 2010 - 8:10 PM
Spider77 Get the whole axle...less stress. Feb 28, 2010 - 8:22 PM
pittfirefighter QUOTE (Spider77 @ Feb 28, 2010 - 9:2... Feb 28, 2010 - 8:27 PM Spider77 With all the work youre going to put into removing... Feb 28, 2010 - 8:35 PM Lord_Samwise The axle is stuck in the transmission... I can... Feb 28, 2010 - 10:06 PM rave2n You can pry it right out Feb 28, 2010 - 10:24 PM Euphoria You have to push it in and pull it out, also try g... Feb 28, 2010 - 11:32 PM Smaay i just rebuilt a 7A-FE and let me tell you those a... Mar 1, 2010 - 2:17 AM njccmd2002 with propper skills it takes less than a minute.
... Mar 1, 2010 - 3:04 AM Delta_Phoenix I changed my axles several years ago and had this ... Mar 4, 2010 - 10:44 AM Lord_Samwise Thanks for the help.
I got my hands on an air chis... Mar 4, 2010 - 9:17 PM Batman722 there is one c clip on each inner shaft. You just ... Mar 4, 2010 - 10:10 PM Hanyo crow bar and mallet.
Your essentially hitting t... Mar 5, 2010 - 4:28 AM rave2n Just finished my passenger axle bout 20 mins ago, ... Mar 7, 2010 - 5:11 PM |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 24th, 2024 - 3:47 AM |