Idea ive had for a wile.... Options

[mandrek]

So here it goes, i have a 95 ST (7afe). that i DD and do auto-x with. i have been looking at doing a few mods to help with reducing paracitic drag off of the week 7A motor, and have come up with a few ideas that i would like to run by u all.

i have read a number of threads on hondas taking the MR2 EPS pump and running the set up as to remove parasitic drag off the motor. now, here is what i have been thinking of doing for a wile now, it should be a pretty simple set-up, but am looking into getting some info on the topic before i make the plung..

currently the PS and the water pumps share a belt on the 7A.

what i have thinking abut doing is adding a small electric motor to that side of the motor and remove those two pumps from pulling off the crank. sorta like this.

E-motor
(o)\
|----\
|-----\
(o)_(o)
^----^
PS-----water

not only would this remove 2 sorces of paracitic drag from the crank, but it would also avoid the water-pump from developing cavitation at high engine RPM's AND allow for the PS to be at full boost almost all the time..

the car is still not a dedecated track car so the on/off full PS boost may not be compleatly nesisary, but still an advantage wile auto-xing.

let me know what u all think.. looking for ALL input good or bad..

This post has been edited by mandrek: Mar 25, 2010 - 7:49 PM

[Mstoochn]

or you could just remove the PS pump...