HELP MEEEE!!!, Where is the pcv valve? Options

[muhmin]

hi, please may someone help me by providing a picture of where the breather pipe is on a 1996 Generation 6 celica GT from the pcv valve going to the air intake manifold?

I will try to add a photo onto my profile picture?

Cheers

This post has been edited by muhmin: Apr 1, 2010 - 9:34 AM

[muhmin]

Hi,
can someone please circle the PCV valve , the one from the engine to the air intake manifold, also can someone please circle the air intake manifold aswell?

i think this can be done through paint the best

Regards

[Tech-Nics]

Hi,
can someone please circle the PCV valve , the one from the engine to the air intake manifold, also can someone please circle the air intake manifold aswell?

i think this can be done through paint the best

Regards

^^^ It's the thick black tube coming out of the front. Right under the two bolts.

[muhmin]

hi i know this sounds rlee stupid, but i cant see it on this picture.

http://www.6gc.net/photo/member/12606/2

That is a photo of my engine bay. I have a air kompressor with the follwing instructions.



1. Locate the Breather pipe between the engine and the air intake manifold.

2. Cut the pipe and insert the corresponding size of “T” connector

3. Locate a suitable place for placement of the unit.

4. Secure the compressor into place using cable ties

5. Connect to the T-connector using hose provided

6. RE-CONNECT BATTERY AFTER 15 MINUTES HAVE ELAPSED

7. Start engine and use the screw at the top to adjust the idle speed


As you can see from the diagram i dont have that valve under the two bolts. Regards