frotou 7agte build thread, finally some engine bay pics !!!! Options

[frotou]

Last year the engine was in break in period @ 8 psi. Nothing was going wrong exept ... for the oil consummation ; 1 quart every 300 miles. I decided to open the engine again to see. It was the fuc**** total seals rings who dosen't do their job. So for 2k7 ;

act xtrem pressure plate and 6 puck (w/o spring) disc



custom aluminium race intake



beside the manifold/turbo



arias 82 mm piston/rings



pauter rods (already in motor last year)



block bore to 82 mm



No more blue this year



Now waiting for some parts to reasemble the engine. More pics later.

Claude

This post has been edited by frotou: Oct 24, 2010 - 2:20 AM

[frotou]

Some progress

Wiggins clamp on the intake + drill hole for the water jet and air intake temp. for the ecu .







New 70 mm throttle body with wiggins clamp



The turbo received also the new clamp





I don't plan any numbers right now , the limit will be the turbo and also the tranny. With the new child, the full time job and the house I can only hope and try my best to complete the project .


More pics soon.