FS: PARTING OUT 97 GT, tons of PICS page 2 !!!!!!!!!! Options

[hurley97]

**UPDATE ON SECOND PAGE WITH THINGS THAT ARE LEFT**

1997 Toyota Celica GT, Auto, Power windows/locks, Sunroof, Grey interior

More info and problems with the car:
This car has a lot of bondo and bad body work done to both rear quarters and the bottom of the doors are starting to show signs of rust.
The key works great in all the locks. Ignition cylinder, both doors, trunk, glove box. One original master key and one newly cut key, both work.
The interior is in great condition. The car only has 126,853 miles on it. Everything electronically works except for the shifter. Gas pedal is no good either.
The door panels are beautiful, only problem is a spot on the passenger side that's deformed but you can't see it when the door is closed (see pics).
The right side window regulator/motor is in our red car and the one from our car is in this one. It went up slow and made noise toward the top of the track.
I think Dustin wants the seats, we won't ship them anyway, but if someone locally wants seats they can look at the ones in his car and we may sell those.
The car started and ran but had a rod knock, while trying to drive it home the rod let go and I seized the motor. Bottom half of the motor is no good.


****EDIT*****PICTURED ARE THE THINGS THAT ARE LEFT*****









This post has been edited by hurley97: May 19, 2010 - 7:44 PM

[GriffGirl]

Do you have or are you selling the calipers? IIRC front GT calipers are different than front ST calipers, right? If so then I'd just want the rear calipers, if the fronts are compatible w/ST, I'd want all 4.

PS: That clockspring showed up from the junk yard in Utah, btw... but thanks for the quick response (even though my thanks is delayed )

This post has been edited by GriffGirl: May 12, 2010 - 4:55 PM

[hurley97]

Do you have or are you selling the calipers? IIRC front GT calipers are different than front ST calipers, right? If so then I'd just want the rear calipers, if the fronts are compatible w/ST, I'd want all 4.

PS: That clockspring showed up from the junk yard in Utah, btw... but thanks for the quick response (even though my thanks is delayed )

GT front calipers are bigger, you would need new rotors and pads to use the GT fronts on your ST. The rear calipers have already been sold with all the rear disc conversion parts.

No problem, if you need anything else just ask.