BEAMS turns but wont start |
BEAMS turns but wont start |
May 9, 2010 - 6:13 PM |
|
Enthusiast Joined Oct 26, '09 From Florida Currently Offline Reputation: 2 (100%) |
i have read through everything turnip has done in his thread to try to figure out why my beams wont start. i just so happen to own a 94gt myself. i have tested spark, fuel pump, etc. but it seems like the fuel pump doesnt get a signal to pump gas in. i have also noticed that when i do get it to sputter the rpm gauge doesnt move. and also that my radio doesnt turn on anymore. any help/advice is very appreciated
|
May 14, 2010 - 11:49 PM |
|
Enthusiast Joined Aug 29, '02 From Kelowna, BC Currently Offline Reputation: 0 (0%) |
The bridge on EA1 is from pin 4 to pin 17. Mine would turn over and had spark, all the same symptoms you have described. After I tied the two pins together, the engine fired up first try.
Going on 5 years now and still purrs like a kitten.....er.... tiger. 6GC install link -------------------- 1994 GT-S (BEAMS) swap complete |
Lo-Fi Version | Time is now: January 11th, 2025 - 11:24 PM |