GT-Four brakes, with pics *updated Options

[Batman722]

first I bought these, st205 calipers, rotors, lines.



then to make them bolt on, I shaved off a few mm from the mounting points





remove old pads and hardware and give a quick paint job





then got new pads, shim kit, pins, ect



and installed in the calipers



next step is
1. getting the 205 rotors trimmed from 315mm to 298mm
2. getting spacers, either 10mm or 15mm (I need to test/measure, then install them)
3. bolt on (I'm not sure if I'm gonna tap my hub or use nuts/bolts), bleed lines, drive

I'll update as I get things done.

This post has been edited by Batman722: Jul 21, 2011 - 10:03 PM

[malpaso]

Amazing info. How hard is that caliper trimming?

This post has been edited by malpaso: May 30, 2010 - 1:09 AM