Need Help! |
Need Help! |
May 29, 2010 - 10:50 PM |
|
Enthusiast Joined Mar 13, '10 From New Iberia Currently Offline Reputation: 0 (0%) |
Hey guys/girls, I have a problem. I have a 5 speed and whenever I do normal driving, the car runs excellent. But whenever I start from a stop and take the rpm over 5k and try to shift into 2nd gear it does not go into gear. Earlier today I was unable to get into 2nd, 4th, and reverse. Any advice?
|
Jun 1, 2010 - 9:12 PM |
|
Enthusiast Joined Jan 18, '08 From Houston Currently Offline Reputation: 7 (100%) |
If you pop your hood. and you stand facing your winshield. Your engine is to the left and the tranny is to the right.
On the right (driver side) frame rail, locate your fuel filter. EDIT: Driverside if it's USDM Now the shifter cables are cables with round "washer" shaped objects on the end. (just really fat washers) they also have PINS to hold the tie bars within the cables hooks. Now if that's all good then follow the cables from the tranny there, back twards the firewall. You'll find the mounts about 6-8 inches away. MAKE SURE THE CABLES SIT IN THE MOUNTS! and Make sure the Mount-Clips are in place~ Tightly!! This will fcuk up your shifting. IIRC: I believe your Problem will be here, on the top cable. ( it determines (iirc) up and down, the bottom determines left and right @ shifter) yes you can move these and move your shifter into gear so DO NOT do this with the car running!!!!!!!!!!!!! cool? This post has been edited by D-Man: Jun 1, 2010 - 9:12 PM -------------------- QUOTE (presure2 @ Nov 6, 2010 - 6:16 AM) Via FB: fcuking awsome!!! D-man FTW! Damn D-Man - most impressive. D-Man's post should be a sticky LOL, oh boy, you can always count on D-Man for ridiculously hilarious posts. |
Lo-Fi Version | Time is now: December 2nd, 2024 - 7:01 AM |