need help....rebuilding a 5sfe, new problem, wont start nor crank !! Options

[Malhar95]

car info:
1995 toyota celica gt convertible

okay so when i got my car, i didnt really know what all is wrong with it. When i wend to the mechanic, he said i have low compression on one of the cylinders. He suggested a new engine. THen i went to another mechanic. he took some tubes out and told me one on my valve is bent and suggested a new cylinderhead.I got it to work, and installed ebay headers and an intake. about two weeks ago, i blew my header gasket.
Now i ordered a new cylinderhead from ebay :

http://cgi.ebay.com/ebaymotors/ws/eBayISAP...RK%3AMEWNX%3AIT

my brother now tells me to rebuild the complete engine. He says i now need the following:
Bearings
pistons
motor mounts
crankshaft
oil pump
waterpump
timing belt
gasket set
lubricants and sealants


i found a rebuild kit on ebay for 300 dollars shipped but it doesnot have the crankshaft, pumps and timing belt.

i was just wanted to know if this is all i need and/or something else. and how much would the labor be for some stuff i cannot do it myself.

please help me i would really appriciate it.

if some of u live near houston texas (tx) can you meet me and tell me all i need!

This post has been edited by Malhar95: Aug 17, 2010 - 3:35 AM

[stephen_lee]

if your asking what you need to rebuild a motor, i wouldnt tackle the job. rebuilding is not a fast process, as you need to pull the engine apart, determine if the crank is in good shape or if you have to grind it, which determines what size bearing you need to order (from toyota) if the cyl walls are out of round or too pitted/scored to just hone and reuse, if they are u need pistons, and over sized rings.

Basic rebuild list:

correct size rod bearings
correct size main bearings
thrust washers/bearings
piston rings (maybe pistons, too)
gasket kit
oil/water pump
timing belt/tensioner

plus odds and ends like FIPG, assembly lube, oil, power steering fluid, trans oil/fluid, ect.