Shift Light, How-To Options

[Defgeph]

OK here goes.

I hooked mine up to a 3sgteRC.
Not sure if the 7a and 5s are the same.

The unit has three wires. Black, Red, Green(in mycase)

Black goes to ground. The red goes to positve, like the cig lighter.
Green or signal wire connects to the solid black wire on your ignitor in the engine bay.

After ur done you should have something like this


The end

DEF

[terbear4god4life]

or a simpler shift light and a lil more useful

a stri sequential shift light plugs straight into a cigarette lighter using a 12v signal and is still very accurate no tach wire or anything just plug and play
you set a low and high like me personally have the low(so the first led comes on) at 4k and set the last led too just about 5.5k


ill make a write up soon
http://www.importpartspro.com/esi-comp.html

http://www.6gc.net/photo/member/10052/4
here it is in my car the unit itself is in the middle of the steering wheel and the control box is were the clock should be

This post has been edited by terbear4god4life: Jun 12, 2010 - 12:57 PM