FS: 5sfe ross racing pistons & rings, $225 shipped, new in box, payed $600 Options

[pxcr440]

CODE

Uploaded with ImageShack.us sorry bout the size , can somebody fix that

like it says i have a set of 5sfe ross racing pistons and ross rings , they are 8.5-1 compression pistons sized for .030 over
bore size- 3.445 net dia. 3.440
C.H. 1.278
ring lands: 1.5 1.5 3.0 mm
pin size .886
dome size: -19.5
,
i purchased a 2nd gen 3s and never got around to building the old 5s motor , i have a bored and honed block ready for these pistions but shipping would kill the deal , so this is the only parts i think i will sell, but i also have lots of small 5s parts left over

This post has been edited by pxcr440: Mar 9, 2011 - 2:19 AM

[pittfirefighter]

show some pics and i will probably take them for my 5sgte build... i will have to double check the compression i want to run, might be too low

[presure2]

show some pics and i will probably take them for my 5sgte build... i will have to double check the compression i want to run, might be too low

they wont work with a 3s head, the valve reliefs are diffrent.

bump again for a great price.
if i had kept the 5sfte going, i definetly would have bought these, 4 new STOCK pistons from toyota cost more.

[pittfirefighter]

show some pics and i will probably take them for my 5sgte build... i will have to double check the compression i want to run, might be too low

they wont work with a 3s head, the valve reliefs are diffrent.

i don't think thats right... looking at the two, i don't see how they are not interchangeable