Shift Light, How-To |
Shift Light, How-To |
Oct 8, 2005 - 10:57 PM |
|
Moderator Joined Apr 17, '03 From Rockland NY Currently Offline Reputation: 15 (100%) |
OK here goes.
I hooked mine up to a 3sgteRC. Not sure if the 7a and 5s are the same. The unit has three wires. Black, Red, Green(in mycase) Black goes to ground. The red goes to positve, like the cig lighter. Green or signal wire connects to the solid black wire on your ignitor in the engine bay. After ur done you should have something like this The end DEF -------------------- I will return one day. |
Jun 11, 2010 - 4:15 PM |
|
Enthusiast Joined Mar 8, '04 From Newport, RI Currently Offline Reputation: 63 (99%) |
Black goes to ground. The red goes to positve, like the cig lighter. Green or signal wire connects to the solid black wire on your ignitor in the engine bay. Hello, I have a question about the instalation, where did you pulled the signal wire?? -------------------- |
Jun 17, 2010 - 4:23 PM |
|
Enthusiast Joined Apr 18, '06 From Calgary, Canada Currently Offline Reputation: 37 (100%) |
Black goes to ground. The red goes to positve, like the cig lighter. Green or signal wire connects to the solid black wire on your ignitor in the engine bay. Would it be possible to hook up/splice the signal wire directly into the tach wire at the back of the speedo cluster? -------------------- |
Lo-Fi Version | Time is now: November 30th, 2024 - 11:52 AM |