Power from 7a, looking for 200 Options

[FallenHero]

Ok, I have set my power goal for my 7a at 200 hp at the wheels.

Now the question is, how?

The obvious answer from most is 'slap on a turbo.' but that's not what I want to hear.

I am going to re-build my engine soon. Here is my plan:

Re-build enging to brand ,new stock condition + a 1.8-2.0mm head gasket to lower compression a hair. Then, underdrive pully, and retard the timing a hair with adjustable cam gears for a 'rolla. Turbocharger +large FMIC and about ten pounds of boost.(maybe up to 14psi).

I have also thought about calling up jet and having the rev-limiter on my car raised up to 6500-6800. What do you guys think about that?

So, with proper tuning and electronics, what kind of power output do yall think I'd get? I have seen turbo 7a's pulling 170ish, So I have high hopes.

keep in mind I am thinking outloud here so...

Thanks for reading.

Jon

[FallenHero]

Where would I find forged pistons that I wouldn't need custom rods?

That was my big problem. Forged pistons cost, but not nearly as much as custom rods...

And I figure a supra fuel pump would work, if I can't get a nice aftermarket unit cheap.

Also, I have heard the 7a head makes the engine smoke a little under boost. Any suggestions other than the re-build? I actually thought about a 4a head swap,but the wiring and manifold set up would be a pain.