foureyedfreek's project, project: usdm-4 (OEM DREAM DREAMSICLE.) Options

[4-eyed-freek]

this car was one of them junkyard saves, i have put so much time into it and i thought i would show you whats new with it.

removing the wing.. getting ready to put on the gt-four wing raisers


added anti heat wrap to the intake manafold



adding some sound system stuff





and finally, preping the wing for the gt-four wing raiser that will be here within the week. i will update more pics when it gets here.



hope you enjoyed looking!

This post has been edited by 4-eyed-freek: Mar 30, 2011 - 11:22 AM

[4-eyed-freek]

here are some new pics of my attempt at custom door sills( i have new ones so i thought i would try something wit the old ones.)

Project iluminated door sills.
ok first remove the door sill, it pops right off, then i would clean it with some water and soap

< then note the position of the little space between the two plastic pices( you will be able to see wires)
this is where the light(i used an led) will be placed

<next mark the spot on the sill to show where the opening was under it (this is where u will cut out the lettering)

here are the tools i used,+ an exacto knife

it will need a little sanding but it looks ok

with your knife remove the small amount of plastic so the light will be able to shine through.

next i used a flat black spray paint to give it a beter look(keep in mind i never sanded the lettering down yet.


i will update more on how to install the light but as of last night they looked really cool!

This post has been edited by 4-eyed-freek: Jun 22, 2010 - 3:59 PM