Power from 7a, looking for 200 |
Power from 7a, looking for 200 |
Jan 6, 2004 - 9:35 PM |
|
Enthusiast Joined Dec 26, '02 From Alabama Currently Offline Reputation: 2 (100%) |
Ok, I have set my power goal for my 7a at 200 hp at the wheels.
Now the question is, how? The obvious answer from most is 'slap on a turbo.' but that's not what I want to hear. I am going to re-build my engine soon. Here is my plan: Re-build enging to brand ,new stock condition + a 1.8-2.0mm head gasket to lower compression a hair. Then, underdrive pully, and retard the timing a hair with adjustable cam gears for a 'rolla. Turbocharger +large FMIC and about ten pounds of boost.(maybe up to 14psi). I have also thought about calling up jet and having the rev-limiter on my car raised up to 6500-6800. What do you guys think about that? So, with proper tuning and electronics, what kind of power output do yall think I'd get? I have seen turbo 7a's pulling 170ish, So I have high hopes. keep in mind I am thinking outloud here so... Thanks for reading. Jon |
Jan 7, 2004 - 12:20 PM |
|
Enthusiast Joined Aug 30, '02 From Anaheim, CA Currently Offline Reputation: 0 (0%) |
the torque converter would not be the weak part of the ST auto tranny.
but the auto tranny should be stronger than the manual tranny because the parts inside are bigger you could get a new auto tranny, that would help, or you could have you tranny rebuild with performance in mind www.level10.com -------------------- 1994 Celica GT4 WRC Edition
@gt4.wrc on Instagram |
Lo-Fi Version | Time is now: November 27th, 2024 - 7:44 PM |