hks boost controller help Options

[dougone81]

i was wondering if anyone could explain how to reset the boost settings to stock settings??
I have an st205 with a hks evc, and it was running stock boost. Ater pushing a few buttons to try and increase the psi, i can tell it is not right. I lost myself trying to correct it. when i accelerate the engine revs up real fast with out much power. i can tell there is little to no boost and have not learned the boost controller enough to figure out how to get back to normal settings
any suggestions??

This post has been edited by dougone81: Apr 17, 2010 - 11:26 PM

[Mr_Tee]

There should be two hose coming from the turbo solenoid. One connecting the turbo housing (Snail)and the solenoid and the other from the solenoid that leads to VSV for the ecu to control boost pressure. (VSV). The one leading to the VSV needs to be blocked off. Then disconnect the hose leading into the Solenoid from the Snail and re-routed it to the IN-let on the HKS evc solenoid boost controller. Then on the OUT-let HKS evc solenoid boost controller routed back to the solenoid on the turbo. Hope that helps. I'm currently searching for a document explains this set-up for the ST205. Before you start, what's your current stock boost? Let's how you don't have any boost leaks.