Deathsythe's Interior |
Deathsythe's Interior |
Jul 2, 2010 - 2:14 AM |
|
Enthusiast Joined Jun 25, '10 From NY/NJ USA Currently Offline Reputation: 0 (0%) |
I've been talking a lot about it, but have failed to show you guys anything. My apologies. I'll catalog and keep updates to my interior work, as well as take feedback, suggestions, and criticism here.
The whole thing (minus radio lights - took this photo when it was still not working, and dome light) Gauges - Painted needles on the right to test out how they would look before redoing all of them. Replaced green turn signals w/ red plastic. Clear White LED's behind for the gauges. Not Lit Lit From the drivers' seat All in all I am pretty pleased so far. I have run into some issues, but save for the radio failure - nothing catastrophic. I've got LEDs in the center console vents (goes to a switch I built into the center console - not shown in any of the pictures), in the coin collector next to the cigg lighter. Took the ugly green casing off of the cigg lighter bulb to make it white. White LEDs behind the gauges, red painted needles, red turn signals, and cathode ray tubes in the footwells (goes to a switch under the steering wheel). I have the overhead light replaced with a red bulb, but its blown atm. My next projects (in no particular order)
If anyone has any suggestions or tips for where I can get lighted speakers at a decent price, I would really appreciate it. Also - I haven't looked at a schematic for the door lights just yet, but I may just put another bulb in their so I don't muck with the existing circuit anymore. Suggestions there would help too. So what do ya think? |
Jul 3, 2010 - 5:06 AM |
|
Enthusiast Joined Jun 25, '10 From NY/NJ USA Currently Offline Reputation: 0 (0%) |
Will do guys, thanks for the interest. It will happen later this coming week after the 4th. I am between Summer I and Summer II sessions and just about done with Summer I finals, so I'll have the time.
tbh - I tried an acrylic paint that I had lying around at first, but that didn't work too well (didn't let enough light through) so I removed it. Currently it is literally just red sharpie (but that'll be our little secret). Works fantastically surprisingly enough and lets just enough light through. |
Lo-Fi Version | Time is now: November 29th, 2024 - 8:48 PM |