FS: Greddy SP1 muffler, Best offer Options

[razor7]

Hey Guys,
so since apparently I broke the non-exhistant forum rules by doing a bidding contest, this is now reposted as BEST OFFER. PM me what you are willing to pay with shipping and I'll get back to you.

So to anser some questions right off the bat:

Is the muffler in perfect condition?
- No, it has a dent on the can and the bottom of the "megaphone" tip has seen better days. However, none of these cosmetic issues are seen once it's installed.

So there's a dent on the can, has this affected the performance or sound?
- Not one bit, the muffler does not rattle, whine, or even sound like a stereotypical "ricer" In fact, the sound that's emitted is very similar to the stock exhaust, with it just being deeper and meaner.

Why are there spots left over from other hangars?
- I don't honestly know. I bought this used from some guys off of craigslist in its exact current condition. In the 8 months that it has been on my car, I haven't had any issues with rubbing or anything. I also know that this is the greddy sp1 exhaust that is specific to the celica, no other SP1s came with that same style of exhaust tip.

Why is the inlet piping larger than that of the exhaust?
- After reading around I decided on 2 1/4" piping for my custom cat back. The inlet on the muffler itself is 2", so the piping used to connect to it is slightly bigger. You can chop it off and weld on 2" piping, or go with 2 1/4" like I did.

What will be required for me to install it on my car?
- Well, you'll need to have one of the hangars re-done (chopped it off to remove it), and to have it welded to your current cat-back system. The one hangar that is still attached will hold you up and in place. I am also including the over axle made 2 1/4" piping that I had custom done in order to save you time and hassle.















Thanks and take it easy,
-TC

[razor7]

Bump.

-TC