Stubborn Crank pulley bolt 5sfe 98 Options

[chinamandrift]

ok so i went to the store bought everything needed to do my water pump and timing belt over the weekend

98 celica 5sfe convertible

i got everything set up and started taking everything apart..

everything was cherry until ....i got to the crank pulley bolt ..

it will not move..ive tried 3 different impact guns

ive tried a special tool to hold the pulley in place with the bolt holes and the tool broke..

ive tried a single bolt and a pry bar to hold it in place and the bolt bent all to hell..

is there anything else i cant try to take this bolt out ...safely ?

id appreciate it if you guys have some ideas, i have 1 day left to work on it.. then have to travel back to school

[Remy]

I used the starter method but use it at your own risk I don't want to be reliable if you do it wrong Google it and you will know what I mean.

[chinamandrift]

I used the starter method but use it at your own risk I don't want to be reliable if you do it wrong Google it and you will know what I mean.

dont think this will work for me ...i already have taken the top section of the timing belt off ....and the engine is on TDC #1 comp ..has anyone tried heating the bolt up ? i heard that works ..