Sub-Frame WIN! :( "custom"! new pics, can someone explain?! Options

[mgnt232]

Soo i decided to replace my almost shot subframe today with the one I bought from Jims 95 ST (mines a 94, but i didnt think it would mattterrrr )

So every single! bolt lines up fine, with the exception of 2....fairly important bolts
The bolt on the top, to hold the rack and pinion in place do not line up. I measured with a piece of string (after I spent many rust filled hours in the hot sun, and took out and put in the new one) and discovered (pic shows details) that the new k-frame is bout 1 1/2" - 2" longer than my original. They are generally in the same place, like if my rack was 2 inches longer it would work perfect...but its not

I think I have an idea, as I am just going to get a piece of metal (like 1/4" thick) and cut it to be able to extend the piece the steering bolts to. Then drill out holes to bolt to the holes on it now, and drill out holes to where the rack can actually bolt on. I feel like if i get it sturdy it should be fine, as it just has to hold it in place. And once its in I will bring it to my uncles to try and weld the extended pieces on there, so my steering doesnt just break

Why would this be though? i just 100% do not understand, is the steering from a 94 really that much different than a 95? I mean my engine is from a 95! Keep in mind absolutely every other bolt is, on and perfectly fine...

any thoughts would be great as i have given up for the day (took me alone like 8 hourrrsssss, mainly cause i didt really know what i was doing) .
ugh this suckkkss..



This post has been edited by mgnt232: Aug 2, 2010 - 7:31 PM

[njccmd2002]

you left the finger there... ha ha.

yes i agree that support is messed up.

swap the colums from one support to the other...