 Wheel fitment question turned to torque rating question |
 Aug 3, 2010 - 1:06 PM
|
 
|
 Enthusiast  Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%)  |
I'm going to be installing coil overs soon and I'd really like to have spacers by the time I get the coilovers. I don't wanna be completely hella flush, but I don't want my wheels to be sunken in. I have 17x7.5 wheels with a 45mm offset and I'm about to have Falken Ziex 512's all around (215/45/17). What size spacers would I need to be pretty flush? I've read the other topics on this, but I'm still not sure how to add up the math with the offsets. Help would be AWESOME.
This post has been edited by HectortheRican: Aug 4, 2010 - 7:18 PM -------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
 |
Replies
|
Aug 3, 2010 - 2:11 PM
|
|
 Enthusiast Joined Feb 5, '05 From pineapple under the sea Currently Offline Reputation: 9 (100%) |
Flush in front with 7.5" wheels is +15
Flush in rear with 7.5" wheels is -2 To achieve those you need a 30mm spacer in front (45-15=30) and 47mm spacer in the back (45- -2 is 45+2=47) -------------------- 1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of money
 I'm not really an asshole, but I play one on the internet. **** Photobucket |
Posts in this topic
HectortheRican Wheel fitment question turned to torque rating question Aug 3, 2010 - 1:06 PM
HectortheRican That's what I came up with when I did the math... Aug 3, 2010 - 2:36 PM georgie Not trying to threadjack but,
I'm also wonder... Aug 3, 2010 - 3:32 PM 95CelicaST You can leave it without spacers, but it'll lo... Aug 3, 2010 - 4:22 PM HectortheRican What's the center-bore on our cars? Or is that... Aug 3, 2010 - 6:04 PM
whatthe QUOTE (HectortheRican @ Aug 4, 2010 - 9... Aug 3, 2010 - 11:16 PM HectortheRican QUOTE (whatthe @ Aug 3, 2010 - 11:16... Aug 4, 2010 - 1:10 AM 95CelicaST 57.1 or 56.1 - I can't remember off the top of... Aug 3, 2010 - 6:52 PM HectortheRican Where can I find out for sure? Because I need to b... Aug 3, 2010 - 6:58 PM 95CelicaST Go out and measure? I mean, why is it THAT importa... Aug 3, 2010 - 7:50 PM HectortheRican Yeah. I just needed to get an estimate Aug 3, 2010 - 8:09 PM EKAn its 54.1 Aug 3, 2010 - 11:15 PM whatthe ^ Yes thats true Aug 4, 2010 - 6:48 AM HectortheRican I need the torque ratings for
1.)the 3 top bolts ... Aug 4, 2010 - 7:19 PM 808celica 1.50lbs should be good
2.knuckle bolts???? axle nu... Aug 5, 2010 - 4:47 AM HectortheRican QUOTE (808celica @ Aug 5, 2010 - 4:4... Aug 5, 2010 - 9:46 AM 95CelicaST Yeah those spacers are going to be huge.
And the... Aug 5, 2010 - 7:42 AM 808celica i also have to say THANK YOU for retitling you thr... Aug 6, 2010 - 2:59 AM HectortheRican QUOTE (808celica @ Aug 6, 2010 - 2:5... Aug 6, 2010 - 9:47 AM |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: December 2nd, 2024 - 1:15 AM |