 JDM Facelift headlight connectors, Does not fit the car |
 Aug 11, 2010 - 4:38 PM
|
 
|
|
Enthusiast  Joined Dec 16, '08 From Norway Currently Offline Reputation: 0 (0%)  |
Hi.
I installed the JDM facelift headlights on my car today. The problem is that the connectors on the lights that are on the outher left and right side don't match with the connectors that are on the car. So I got no light atm. I'm pretty sure many on this forum had this unexpected case, so I hope I can get some help about what I have to do now ? Pictures:    
This post has been edited by Iceman22: Aug 11, 2010 - 4:39 PM -------------------- - Celica ST202 w/ JDM 3S-GE 180HP (Special LE Subaru Blue steel paint!)
- A video of my car, before & after: Click here |
 |
Replies
|
Aug 11, 2010 - 6:30 PM
|
|
 Enthusiast Joined Mar 3, '04 From Portsmouth, RI Currently Offline Reputation: 33 (100%) |
You are going to have to buy a kit for the OEM lights that were in your car originally, so for 9006 or 9005 bulbs, that way the ballast will plug into your harness. If you buy and H1 kit you will have the same problem you are having now and it will not plug into the wiring for the ballast. Then you need to buy separate H1 bulbs to install in the headlights. Unless you can specify to the seller when you buy them that you need and OEM 9006 connection with H1 bulbs.
-------------------- |
Posts in this topic
Iceman22 JDM Facelift headlight connectors Aug 11, 2010 - 4:38 PM
pyeatts You're going to need HID ballasts and wiring t... Aug 11, 2010 - 4:53 PM Iceman22 OK I see.
So I can for example use this kit: http:... Aug 11, 2010 - 5:26 PM pyeatts Nope, with an HID kit your main lights are ready t... Aug 11, 2010 - 6:07 PM Iceman22 Ok thanks.
Now I have to decide if 8000k or 10.000... Aug 11, 2010 - 6:23 PM
diegohiga QUOTE (Iceman22 @ Aug 11, 2010 - 7:2... Oct 1, 2010 - 6:37 PM AnaXyd Go with 5000k HIDS, its very good looking color, a... Aug 12, 2010 - 3:26 AM Iceman22 I bought a low beam hid 4300k kit that were for de... Oct 1, 2010 - 1:42 PM whatthe Bulb type of low beams projectors are h1
high beam... Oct 2, 2010 - 3:03 AM Iceman22 Yes I know that, 9006 is for the low beams.
Here i... Oct 2, 2010 - 11:02 AM |
3 User(s) are reading this topic (3 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: December 1st, 2024 - 7:16 PM |