![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() Joined May 6, '08 From Lisarow, NSW, Australia Currently Offline Reputation: 0 (0%) ![]() |
Hey, I've had a fair few clunks that have come and gone since I've owned this car but I've had this clunk for a long while and it is getting extremely frustrating, everytime you lift off in a low gear, put your foot down or just make the car misfire the whole front end has a very loud clunk noise, almost like something under there isn't tight, like a loose engine mount, only everything is and I've literally checked every suspension/cross member and engine mount bolt.
both bearings have been done recently and are problem free, struts and springs were done a couple years back and all bushings seem to be fine. I can see it possibly being the driveshafts as they have never been changed, only the boots have been changed but they are showing no signs of play or noise when the wheel is moved whilst jacked up, this is also making it not seem like gearbox. I have noticed when the car is jacked up I can move the driver side spring and it makes a clunk type noise, where as the other side doesnt and either does any other car I've looked at. How loud can a bad strut mount clunk? also is there any other ways to determine what is wrong? Thanks. |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() Joined May 6, '08 From Lisarow, NSW, Australia Currently Offline Reputation: 0 (0%) ![]() |
The more I think about it the more I'm leaning towards it being a bad inner cv joint. You said they were the original axles, how many miles do you have on the car? 240 000 km's bahaha I've been thinking its that for a good while but they don't have any play, only a tiny bit of play which I thought was normal. |
![]() ![]() |
Lo-Fi Version | Time is now: February 17th, 2025 - 4:06 PM |