need help....rebuilding a 5sfe, new problem, wont start nor crank !! Options

[Malhar95]

car info:
1995 toyota celica gt convertible

okay so when i got my car, i didnt really know what all is wrong with it. When i wend to the mechanic, he said i have low compression on one of the cylinders. He suggested a new engine. THen i went to another mechanic. he took some tubes out and told me one on my valve is bent and suggested a new cylinderhead.I got it to work, and installed ebay headers and an intake. about two weeks ago, i blew my header gasket.
Now i ordered a new cylinderhead from ebay :

http://cgi.ebay.com/ebaymotors/ws/eBayISAP...RK%3AMEWNX%3AIT

my brother now tells me to rebuild the complete engine. He says i now need the following:
Bearings
pistons
motor mounts
crankshaft
oil pump
waterpump
timing belt
gasket set
lubricants and sealants


i found a rebuild kit on ebay for 300 dollars shipped but it doesnot have the crankshaft, pumps and timing belt.

i was just wanted to know if this is all i need and/or something else. and how much would the labor be for some stuff i cannot do it myself.

please help me i would really appriciate it.

if some of u live near houston texas (tx) can you meet me and tell me all i need!

This post has been edited by Malhar95: Aug 17, 2010 - 3:35 AM

[hatchy_gt-s]

That thing is nice and looks beastly ! lol

X2!!!!!!!!!

Thanks

well like i said before, i already had a new head with the valves and cams etc. so thats out of the budget,

1. the kit cost around $250
2. fluids cost me around $50 (i had most of them already)
3. BOLTS were around $100-$150
4. mics./gaskets $50
5. mounts $188 for front and back
6. CV axles $120
7. machine work: $160-$180 (includes machined crank and fake sleeve (the guy later told me i need a sleeve as honing wouldnt help and charges me $80 to "sleeve" it and when i got it back he in reality just honed it and charged me $80...if ur in houston DON'T go to "joeys machine shop"))

so total about $900 dollars plus some labor cost to my mechanic.

so yea it was over LOL

Ya see we know what we're talkin about!