ChfNix progression thread, The progress of my baby! Options

[ChfNix]

OK, so like it says I have put a lot of money into her and I have only had her a short time, so I will try to update you with what I have done already before I get to the good stuff....

So the first thing was my stereo out of my old car...

Alpine deck


Memphis marine 8's in the doors


Some MB Quart 6.5's in the rear, no pics...

A Rockford Fosgate P3 12 in a custom box


And everything was powered by a Earthquake 900 watt 5 channel amp with a Coustic XM3 crossover and 2, 1 farad Stinger caps, sorry for the ****ty pic, the bright blue LED's were messing with my camera...


And a bad ass alarm which shall remain nameless, but I will say that it has keyless entry, a 2 way pager, remote start, and remote trunk ...

Then a cold air intake...


Then the header...


Then full custom exhaust...






Then TRD quick shift kit and Vincent Doggy arm rest cover, e-brake boot, and shift boot...


Then blue gauges and clock...


Then a new windshield, but I don't have any pics for that...

Then tint...


Rear disc conversion (not installed yet)...


Then a new deck, the top of the line JVC KW-NX7000BT, it has everything, DVD, SD, HD radio, GPS, Bluetooth and Ipod, and you can program it to say whatever you want...



And today we started on the fun stuff!
First had to run 0 gauge wire to the back, the old 4 gauge wasn't going to do!!!


Then Stinger roadkill sound deadening material all over...


We are making a custom fiberglass enclosure to fit in the spare tire well...



And it is going to house the new Memphis CM 12, which is the replacement for the Mojo 12...


Its on the right, next to a normal sub...


And the new Memphis Hybrid amp, the replacement for the big Memphis Belle...





I can't wait!! This is top of the line equipment in a car that is done right by a Master Installer at my local car audio shop: Vibez performance and car audio!

I will keep updating this as my car gets more and more s**t!!!

This post has been edited by ChfNix: Nov 12, 2010 - 12:35 PM

[HectortheRican]

How did you install the 3rd brake light? I'm thinking of doing the same soon

[ChfNix]

How did you install the 3rd brake light? I'm thinking of doing the same soon

Here, I took it out the other day so I took some pics, When I got my clear third brake lens it came from another members car so it was already installed onto the housing.

First pull off the black plastic cover on the hatch.

Next remove these bolts, I think they were 12mm.



Here you can see the bolts, and the LED I used for my light. Once again it's just plug and play!



Here you can see the other two bolts that were hiding behind the Roadkill.



Take off the plate and you can see the two nuts holding the light assembly in place, I used a deep 10mm socket to get these off.



Here is the lens assembly.



It's really easy to do!