6G Celicas Forums

Welcome Guest ( Log In | Register )

> Weird braking at high speeds, NEW TOPIC! how to replace rotors and pads
post Aug 19, 2010 - 11:04 PM
+Quote Post
HectortheRican



Enthusiast
*****
Joined Dec 26, '09
From Albuquerque, NM
Currently Offline

Reputation: 19 (100%)




When I'm going above 55 or so and I apply the brakes, the car seems to shake... the pedal shakes and the steering wheel shakes. Lower speeds, it's just fine. What could that be?

This post has been edited by HectortheRican: Aug 23, 2010 - 2:09 PM


--------------------
taking too long to mod since '09
June '12 COTM
'95 AT200
 
Start new topic
Replies
post Aug 25, 2010 - 1:54 AM
+Quote Post
Rusty



Moderator
*****
Joined Nov 5, '07
From New Zealand
Currently Offline

Reputation: 3 (100%)




bleed your system (properly with a bottle and hose) when you are romoving the calipers. If you dont you will push the fluid back up into the ABS motor and do damage.


--------------------
post Aug 25, 2010 - 8:18 AM
+Quote Post
HectortheRican



Enthusiast
*****
Joined Dec 26, '09
From Albuquerque, NM
Currently Offline

Reputation: 19 (100%)




QUOTE (Rusty @ Aug 25, 2010 - 12:54 AM) *
bleed your system (properly with a bottle and hose) when you are romoving the calipers. If you dont you will push the fluid back up into the ABS motor and do damage.

So before I remove the calipers, bleed?


--------------------
taking too long to mod since '09
June '12 COTM
'95 AT200

Posts in this topic
- HectortheRican   Weird braking at high speeds   Aug 19, 2010 - 11:04 PM
- - Batman722   rotors are grooved. time to replace the pads and e...   Aug 19, 2010 - 11:07 PM
- - HectortheRican   What does that mean?   Aug 19, 2010 - 11:47 PM
- - zonz540   When you press the brakes, they rub on your rotors...   Aug 20, 2010 - 1:42 AM
- - marinos   I also thing the problem might be the rotors I hav...   Aug 22, 2010 - 7:05 PM
- - Stambo   warped rotors   Aug 22, 2010 - 9:20 PM
|- - SoDo   QUOTE (Stambo @ Aug 22, 2010 - 9:20 ...   Aug 23, 2010 - 1:40 AM
|- - jtmlb3k   I had the same issue. It's exactly what everyo...   Aug 23, 2010 - 7:50 AM
- - garin   yea... it isn't worth resurface rotors. buy ne...   Aug 23, 2010 - 9:03 AM
- - HectortheRican   That's what I'm planning on! It'll...   Aug 23, 2010 - 10:13 AM
- - HectortheRican   I like to do as much as I can myself, so could som...   Aug 23, 2010 - 2:10 PM
|- - RockyMountainCelica   QUOTE (HectortheRican @ Aug 23, 2010 - 3...   Aug 23, 2010 - 5:06 PM
- - zfjohnson07   its easy, take off the brake caliper, and then tak...   Aug 23, 2010 - 8:49 PM
- - Rusty   do you have ABS?   Aug 24, 2010 - 12:55 AM
|- - HectortheRican   QUOTE (Rusty @ Aug 23, 2010 - 11:55 ...   Aug 24, 2010 - 1:38 AM
- - Rusty   bleed your system (properly with a bottle and hose...   Aug 25, 2010 - 1:54 AM
|- - HectortheRican   QUOTE (Rusty @ Aug 25, 2010 - 12:54 ...   Aug 25, 2010 - 8:18 AM
- - Rusty   as you are pushing the pads out and removing the c...   Aug 26, 2010 - 1:04 AM
- - Spider77   Its good practice to bleed the system while you ar...   Aug 26, 2010 - 10:29 AM
|- - DEATH   QUOTE (Spider77 @ Aug 26, 2010 - 10...   Aug 26, 2010 - 3:58 PM
|- - Spider77   QUOTE (DEATH @ Aug 26, 2010 - 3:58 P...   Aug 26, 2010 - 4:16 PM
|- - HectortheRican   QUOTE (Spider77 @ Aug 26, 2010 - 3:1...   Aug 27, 2010 - 8:45 PM
- - Spider77   do you think youd be able to make the tx meet?   Aug 27, 2010 - 10:36 PM
- - HectortheRican   QUOTE (Spider77 @ Aug 27, 2010 - 9:3...   Aug 27, 2010 - 11:49 PM


Reply to this topicStart new topic
8 User(s) are reading this topic (8 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: December 2nd, 2024 - 8:52 AM