Manual to power windows!, Workthread, step by step etc Options

[AnaXyd]

Hey there!

Got a ST without power windows, and yeah, its really lame at these days. Its really embarassing to manually slide the windows down, so I have always been thinking of a conversion!

So this is the time, finally. I got my hands on some really nice JDM 93/94 celica doors, with everything. Power windows, power locks, power folding mirrors etc. So I'll got everything I need now, so its basicly to just swap the old ones into these!

But I'll got a European ST, which is LHD. The doors came from a RHD JDM. So its some tweaking with wires.

Basicly I have to do this:

1. Unplug the harnesses from the JDM doors
2. Swith harnesses from side to side (left side goes to right side, and vice versa)
3. Switch panels the same way
4. Switch locks from the original car
5. Unhatch the original doors
6. Mount the new doors
7. Plug in the harness to the car

And this is without ANY problems or trouble. I dont expect it to be as easy as the list, though.

Great resource for JDM Power folding mirrors: http://www.6gc.net/forums/index.php?showtopic=17207
and another one for the power windows: http://www.6gc.net/forums/index.php?showtopic=59251

And another one for wiring diagrams: http://www.6gc.net/forums/index.php?showtopic=75461



This post has been edited by AnaXyd: Aug 21, 2010 - 1:31 AM

[AnaXyd]

Finally...
..after some hours of testing leads, I figured out how to make the lock actuators to work.

6. BLUE/RED
7. BLUE/WHITE

The cables mentioned above are used to make it work. So it works with my aftermarket central locking now, but I really want it to work with the panel too. (The panel where you can lock/unlock the doors with a button close to the power window control)