 The Celica is finally Running!, UP AND RUNNING FOR THE FIRST TIME |
 Jul 7, 2010 - 9:16 AM
|
 
|
 Enthusiast  Joined Oct 7, '09 Currently Offline Reputation: 8 (65%)  |
Well , all went well and i got the 97 st yesterday! I was determined to get it, and i went through alot...
I got up at 7 am to leave to get it.... But my parents didn't show up until 8 45 when we had to be there at 9, but i convinced the guy to call off work so we could get it yesterday.. haha... after that we were finally on the road, but 30 minutes into the trip a Tire blew out on the tow dolly!!! i think god seriously wanted me to get this celica because it blew out right in front of a salvage yard and after spending ten dollars and 20 minutes finding the right tire, i was able to get it switched onto the rim! they even gave me the tools to take it off and put it back on thankfully!! After that i finally made it to the garage where it was at and was checking it out and the guy showed up... i was wondering how i was going to get the car onto the dolley since it needed a new engine... but oh my did i luck out!! Soooo.. all thats wrong is it has the slightest tick i've ever heard in my life... my dad (30 year mechanic At prat and whitney for the military) said its just a bearing i think if i remember correctly! So anyways i was able to start it up and drive it right up onto the dolley! And if thats the case, if all goes well i should have this baby back up and running on the road within a couple weeks  check her out!!    
This post has been edited by NOVAKx17: Mar 7, 2011 - 5:25 PM -------------------- NOVAKx17
2000 Eclipse GT- DD=== oil pump went blown up and sold 1997 Celica ST- swapped and sold 2004 Ford explorer xlt 4x4- totaled 1997 Celica Convertible GT- Going Topless (; (18:32:21) yarik83: axel has a sensitive wife. i hear she used to be a lesbian and then became ferdi ( PARTING OUT A GT COUPE http://www.6gc.net/forums/index.php?showtopic=88592 ) |
 |
Replies
|
Sep 18, 2010 - 12:24 PM
|
|
|
Enthusiast Joined Oct 7, '09 Currently Offline Reputation: 8 (65%) |
well i started taking off all the acessories so they could be ready to transfer over, but while i was sitting there doing nothing after i got them off, i went paint crazy, so everything would look nice and be good to put back on and i wouldn't have to paint it later! ha
          hopefully tomorrow after everything is nice and dry i will start putting some of it back on like the starter, valve cover, and intake... thinking of doing a lil port and polishing before i throw it back on, but i'll have to read up on it some first... i'm getting very excited to see a finished product (= -------------------- NOVAKx17
2000 Eclipse GT- DD=== oil pump went blown up and sold 1997 Celica ST- swapped and sold 2004 Ford explorer xlt 4x4- totaled 1997 Celica Convertible GT- Going Topless (; (18:32:21) yarik83: axel has a sensitive wife. i hear she used to be a lesbian and then became ferdi ( PARTING OUT A GT COUPE http://www.6gc.net/forums/index.php?showtopic=88592 ) |
Posts in this topic
NOVAKx17 The Celica is finally Running! Jul 7, 2010 - 9:16 AM
RvA944 nice find!!!! Jul 7, 2010 - 9:25 AM NOVAKx17 Thanks! its awesome not having a wrecked celic... Jul 7, 2010 - 9:28 AM Keiri Good pickup!
Welcome to the 3L2 Crew! Jul 7, 2010 - 11:27 AM mgnt232 NICE! 5spd FTW!
hope you get it running s... Jul 7, 2010 - 11:59 AM NOVAKx17 ha thanks ! i'm glad to be a part of it... Jul 7, 2010 - 1:23 PM
enderswift QUOTE (NOVAKx17 @ Jul 7, 2010 - 2:23... Jul 7, 2010 - 1:46 PM NOVAKx17 Thanks man! i appreciate it!
and i alrea... Jul 7, 2010 - 1:54 PM rave2n Nice pick up! Props for the 5speed, definately... Jul 7, 2010 - 2:42 PM NOVAKx17 very true, driving an automatic gets old quick.. h... Jul 7, 2010 - 2:45 PM stephen_lee nice pick up dude! Jul 7, 2010 - 9:41 PM NOVAKx17 thanks man.. i'm really looking forward to sta... Jul 7, 2010 - 9:42 PM Jamchell Grats on your new ride. Jul 7, 2010 - 10:43 PM NOVAKx17 Thankss! I''m lovin it (: Jul 7, 2010 - 10:44 PM NOVAKx17 Well, i started tearing it apart this morning and ... Jul 10, 2010 - 4:47 AM NOVAKx17 some more pictures! these are some pics that w... Jul 22, 2010 - 4:56 PM cheela NICE! a limited edition too. Jul 22, 2010 - 8:39 PM rave2n Doesn't a 7A-FE tick normally...from the valve... Jul 22, 2010 - 9:04 PM NOVAKx17 QUOTE (rave2n @ Jul 22, 2010 - 9:04 ... Jul 22, 2010 - 9:31 PM HectortheRican QUOTE (rave2n @ Jul 22, 2010 - 9:04 ... Jul 26, 2010 - 8:10 AM enderswift that u shaped thingy is the thrust bearing. You ma... Jul 24, 2010 - 3:25 PM NOVAKx17 yeah, your right! the guy i bought it off said... Jul 24, 2010 - 4:25 PM NOVAKx17 Hmmmmm so i'm thinking i might take off my 3po... Jul 25, 2010 - 10:40 PM mgnt232 2 Post! IMO
And I wish I could get a surprise ... Jul 26, 2010 - 3:21 AM AuffyZ QUOTE (NOVAKx17 @ Jul 25, 2010 - 10... Jul 27, 2010 - 12:55 AM NOVAKx17 yeah, i definately prefer the two post spoiler ove... Jul 26, 2010 - 12:26 PM HectortheRican QUOTE (NOVAKx17 @ Jul 26, 2010 - 12... Jul 26, 2010 - 12:30 PM NOVAKx17 for sure..... tuesday i have a friend of mine co... Jul 26, 2010 - 12:37 PM NOVAKx17 anyone know if since i have my new header setup if... Jul 28, 2010 - 3:39 PM NOVAKx17 Welllllllllllllll after long anticipation, and pro... Sep 1, 2010 - 12:38 PM mgnt232 sweet! keep up the good work, hope to see a ce... Sep 1, 2010 - 4:03 PM NOVAKx17 well after a long and greuling day i managed
to ge... Sep 1, 2010 - 7:29 PM enderswift awesome job, things are looking good Sep 4, 2010 - 2:17 AM NOVAKx17 QUOTE (enderswift @ Sep 4, 2010 - 3... Sep 4, 2010 - 8:48 AM NOVAKx17 Welllllllllllllllllllllll lets just say today was ... Sep 17, 2010 - 7:26 PM mgnt232 keep it up! haha you gotta get her ready for t... Sep 17, 2010 - 8:54 PM NOVAKx17 QUOTE (mgnt232 @ Sep 17, 2010 - 9:54... Sep 17, 2010 - 9:59 PM enderswift awesome job. always look forward to updates to thi... Sep 18, 2010 - 1:00 PM NOVAKx17 QUOTE (enderswift @ Sep 18, 2010 - 1... Sep 18, 2010 - 1:06 PM richee3 You're doing a good job, Mike. Keep it up and ... Sep 18, 2010 - 1:29 PM NOVAKx17 thanks man, doin my best! once i finally start... Sep 18, 2010 - 1:33 PM mak5603 Cool project bro, looks like it's all comin to... Sep 20, 2010 - 12:57 PM SupraKid New sig?
haha JP!! Looks good so far, im... Sep 20, 2010 - 8:19 PM NOVAKx17 Bahahahhahahhah. cute.
but yeah, i'm learnin... Sep 20, 2010 - 10:47 PM enderswift QUOTE but yeah, i'm learning ALOT from this, a... Sep 21, 2010 - 12:23 AM NOVAKx17 ha yeah, i know it would of cost a ton of money to... Sep 21, 2010 - 8:13 PM NOVAKx17 Still no throw out bearing...
but i did get oth... Sep 23, 2010 - 7:40 PM mgnt232 did you take the turns off ur clipse? lol it just ... Sep 23, 2010 - 8:15 PM NOVAKx17 QUOTE (mgnt232 @ Sep 23, 2010 - 9:15... Sep 23, 2010 - 8:22 PM enderswift oh damn, tie rod ends and sway bar links. hope tho... Sep 24, 2010 - 8:18 AM NOVAKx17 welllllllllll .... i'm still waiting on the T.... Sep 26, 2010 - 11:29 PM NOVAKx17 Thinking about giving up and just posting on craig... Nov 9, 2010 - 9:39 PM njccmd2002 so whats wrong with it now. I mean, can you at le... Nov 9, 2010 - 11:03 PM NOVAKx17 yes, 7a engine. is put back together to the tranny... Nov 10, 2010 - 1:15 AM njccmd2002 you have install the dirvers side first then the p... Nov 10, 2010 - 1:17 AM NOVAKx17 thats really all the simpler it is? i thought the ... Nov 10, 2010 - 1:22 AM njccmd2002 if you have both years mounts, then compare.
its ... Nov 10, 2010 - 1:39 AM mgnt232 The front and rear mounts dont actually support th... Nov 10, 2010 - 5:39 AM njccmd2002 yeah dont listen to ^^^ he does not even know ho... Nov 10, 2010 - 6:02 PM NOVAKx17 Whoooooooooo after tinkering around with it i fina... Nov 14, 2010 - 3:52 PM mkernz22 i believe it would be easier to wire up and then p... Nov 14, 2010 - 9:02 PM NOVAKx17 Finally some long awaited progress...
new valve c... Nov 15, 2010 - 2:07 PM HectortheRican Whenever I have time, I want to paint my valve cov... Nov 15, 2010 - 2:12 PM NOVAKx17 i have the new 16 valve emblem thing, i just haven... Nov 15, 2010 - 2:59 PM NOVAKx17 And even more progress!! pretty productive... Nov 16, 2010 - 12:09 AM mgnt232 Looks mad clean man, keep it up! Nov 16, 2010 - 2:48 AM NOVAKx17 Does anyone have a write up of re wiring the 7a? i... Nov 24, 2010 - 10:01 PM njccmd2002 you mean you did not mark them, usually its a good... Nov 24, 2010 - 10:06 PM NOVAKx17 i didn't think of it when i was pulling the en... Nov 24, 2010 - 10:12 PM mkernz22 Looking good man! Just pulled the 5s out of my... Nov 24, 2010 - 10:16 PM NOVAKx17 thanks! and thats awesome... i hope you didn... Nov 24, 2010 - 10:22 PM mkernz22 Nott that much, if you read my thread you'll s... Nov 24, 2010 - 11:13 PM mgnt232 LABEL! Mark things!! OMG I cant believ... Nov 24, 2010 - 11:46 PM NOVAKx17 Seriously? FML!
sooooooooooo after talking to... Nov 28, 2010 - 3:10 PM mgnt232 GL man keep it up, almost there Nov 28, 2010 - 4:44 PM njccmd2002 why hunt when celi is down...
shame on you, lol Nov 29, 2010 - 6:31 PM NOVAKx17 because hunting comes first above anything in my f... Nov 29, 2010 - 9:55 PM NOVAKx17 Well, finally got the oil pan, on my next day off ... Jan 5, 2011 - 11:08 PM mgnt232 pshhtt! 7a would wreck that! dont you know... Jan 7, 2011 - 12:01 AM NOVAKx17 Well i finally made some more progress today, i go... Jan 9, 2011 - 11:09 PM NOVAKx17 WELLLLLLLLLLLL good news and more good news , upon... Jan 17, 2011 - 4:39 PM enderswift did you buy $450 worth of cf goodness? Jan 17, 2011 - 4:57 PM NOVAKx17 Carbon fiber goodies... no sir. not yet at least..... Jan 17, 2011 - 5:02 PM NOVAKx17 As of last night, i got the oil pan back on, the s... Jan 18, 2011 - 11:53 PM enderswift good job man. I like this thread and I like your w... Jan 21, 2011 - 10:18 PM NOVAKx17 thanks man, that means alot. its always nice when ... Jan 21, 2011 - 10:25 PM NOVAKx17 Guess who finally could get there car back from th... Mar 7, 2011 - 5:23 PM mgnt232 yeahhh! feels good to drive it for the "f... Mar 7, 2011 - 6:17 PM enderswift good job dude Mar 7, 2011 - 6:33 PM bmj67 so what did the mechanic say was wrong with it Mar 7, 2011 - 7:47 PM SupraKid Good to hear novak..I'm gonna say something wi... Mar 7, 2011 - 9:16 PM Lil-Joe101 Congrats bro, it seem u and I are in a similar boa... Mar 7, 2011 - 10:10 PM NOVAKx17 thanks guys...
and correct you are sir... the tim... Mar 7, 2011 - 11:03 PM bmj67 i figured the no spark was the ignitor. good you g... Mar 7, 2011 - 11:26 PM NOVAKx17 Very good. ha.
i figured i didn't really hav... Mar 7, 2011 - 11:28 PM NOVAKx17 I'm thinking today is a good day to start putt... Mar 9, 2011 - 2:32 PM mgnt232 do you have to like stitch those interior pieces o... Mar 9, 2011 - 5:18 PM NOVAKx17 i haven't really looked into the how to on the... Mar 9, 2011 - 5:30 PM njccmd2002 finally, told ya it was the timing... Mar 9, 2011 - 5:36 PM |
6 User(s) are reading this topic (6 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 29th, 2024 - 11:14 AM |