A cure for sticky needles?, Indiglo gauge problem... Options

[Tenchi]

The indiglo gauges were installed a month ago in the Celica. I got these gauges from Speedhut. At first the RPM needle was getting stuck at idle and the speedometer needle was getting stuck at 0-10mph. I still have the same problem with the RPM needle. At idle the needle drops below 500 RPMs, which I know that is not accurate. Also, I've noticed that the speedometer needle is getting worst. When I speed up, the needle jumps and stops jumps and stops until I reach the speed that I'm at. On the highway the needle bearly passes 65 mph when I know I'm going much faster than that (about 75-80). When I slow down its the same thing, drops and stops, drops and stops until I reach the speed or I come to a complete stop. Now I'm worried that this might happen to the gas gauge.

My questions are:

- Can it get worst, to the point where the needles will not function anymore?

- How can I fix this problem?

I will appreciate any help you guys can give me. Thank you!

[Ghost]

http://www.6gc.net/index.php/action/how-to..._article/itu/10 for pictures
http://www.6gc.net/index.php/action/how-to...o_article/itu/9 for installing

I screwed up on putting mine on...a little piece of plastic on the front side of the gauges got turned up so I had to peal some off, so now there is a shiny spot around my rpm needle....so thats ruined.