6G Celicas Forums

Welcome Guest ( Log In | Register )

> How difficult do you think it would be to get from Fwd to Rwd?
post Sep 25, 2010 - 5:53 PM
+Quote Post
dudeofchaos



Enthusiast
***
Joined Dec 9, '08
From Blainville
Currently Offline

Reputation: 4 (100%)




I really love my car and plan on keeping it. I don't wanna sell it, never.
It's not something that I plan on doing soon cause I'm broke, but in a few years I will have my real job and I will probably work as a mecanical engineer and I may also have my mecanic's diploma.

I was wondering how difficult it would be to get from Fwd to Rwd? Could I just take the transmition and rear differencial from an Mr2 (which has the same engine which is good!) and I guess probably the cv axles and probably the suspention/steering-related parts like the tie rod ends and stuff and make them fit together and Voila?

I'm not good enoght right now to know what I shall do to do this conversion, but I will eventually go to school after I get my engineer diploma to learn all about mecanics.

(I plan on having a Rwd Celica and a 4wd Gt-Four later. I don't wanna buy a gt-four and convert it to rwd cause this way I would have to buy 2 gt-fours in the end. I'd rather get my Fwd Gts to rwd and then, later, buy a Gt-Four. So please don't tell me to buy a Gt-Four because ''it would be easier to swap'' tongue.gif)

Do you think it would be this ''simple'' or would I need to do a lot more things to get the rear wheels spinning?
I guess a celica would be easier than other cars to convert since there are a lot of bolt-on parts between the celica-mr2-gt4, am I right?

Well, thanks to those who answer me! smile.gif

This post has been edited by dudeofchaos: Sep 25, 2010 - 5:53 PM
 
Start new topic
Replies
post Sep 29, 2010 - 4:52 PM
+Quote Post
JuMPiiN



Enthusiast
****
Joined Nov 10, '09
From Louisiana
Currently Offline

Reputation: 5 (100%)




Exactly what he said above.

Posts in this topic
- dudeofchaos   How difficult do you think it would be to get from Fwd to Rwd?   Sep 25, 2010 - 5:53 PM
- - JuMPiiN   Simple, no. Anything is possible with money availa...   Sep 25, 2010 - 6:06 PM
|- - dudeofchaos   QUOTE (JuMPiiN @ Sep 25, 2010 - 7:06...   Sep 25, 2010 - 10:37 PM
- - njccmd2002   Ok, why not buy an mr2 and do the front end celica...   Sep 25, 2010 - 6:11 PM
|- - JuMPiiN   QUOTE (njccmd2002 @ Sep 25, 2010 - 6...   Sep 25, 2010 - 6:13 PM
|- - dudeofchaos   QUOTE (njccmd2002 @ Sep 25, 2010 - 7...   Sep 25, 2010 - 6:14 PM
- - playr158   oh man...have i ever been in your spot Cut the f...   Sep 25, 2010 - 6:13 PM
- - JuMPiiN   All I have to say is goodluck, risk isnt worth rew...   Sep 25, 2010 - 6:18 PM
|- - dudeofchaos   QUOTE (JuMPiiN @ Sep 25, 2010 - 7:18...   Sep 25, 2010 - 6:23 PM
- - azian_advanced   sounds like a big task.. you best to start practic...   Sep 25, 2010 - 8:57 PM
- - njccmd2002   ^^^^ nice heater!!! good for cold we...   Sep 25, 2010 - 9:50 PM
- - whatthe   How loud would that be haha.   Sep 25, 2010 - 10:06 PM
- - dudeofchaos   I'm mostly looking to keep the engine in the f...   Sep 25, 2010 - 10:33 PM
- - mkernz22   He thought you were going to do a mid engine at fi...   Sep 25, 2010 - 10:48 PM
- - njccmd2002   first of all 1. do you want A: transverse mo...   Sep 25, 2010 - 11:13 PM
- - richee3   RWD Celica? You COULD do it yourself... Or you cou...   Sep 26, 2010 - 4:49 AM
- - 95celicastLSR   you could just do the gt4 conversion and modify th...   Sep 26, 2010 - 10:52 AM
- - dudeofchaos   I know, but since I will eventually make money lat...   Sep 26, 2010 - 7:00 PM
- - JuMPiiN   If you want it so badly..... buy a MR2 or somekind...   Sep 26, 2010 - 7:37 PM
- - Smaay   celicas were all RWD untill the 5th gen or was it ...   Sep 26, 2010 - 8:02 PM
|- - dudeofchaos   QUOTE (Smaay @ Sep 26, 2010 - 9:02 P...   Sep 26, 2010 - 9:40 PM
- - mkernz22   5th gens were fwd best of my luck to you man if y...   Sep 26, 2010 - 8:15 PM
|- - dudeofchaos   QUOTE (mkernz22 @ Sep 26, 2010 - 9:1...   Sep 26, 2010 - 9:44 PM
- - hatchy_gt-s   Sorry to tell u this but no u won't have thw f...   Sep 27, 2010 - 9:09 AM
- - b1gr3d   Best thing to do is get a rwd donor that has or us...   Sep 27, 2010 - 9:23 AM
- - Smaay   ok if you really want to go RWD its not that hard....   Sep 27, 2010 - 9:51 AM
- - RUNNIN-LOW   QUOTE (hatchy_gt-s @ Sep 27, 2010 ...   Sep 27, 2010 - 9:56 AM
- - dudeofchaos   Oh, too bad if I'm not the 1st one then. I...   Sep 28, 2010 - 9:12 AM
- - czwalga   Ehh, don't start planning stuff out that far a...   Sep 28, 2010 - 10:09 AM
|- - dudeofchaos   QUOTE (czwalga @ Sep 28, 2010 - 10:0...   Sep 28, 2010 - 5:26 PM
|- - czwalga   QUOTE (dudeofchaos @ Sep 28, 2010 - 5...   Sep 29, 2010 - 6:00 AM
- - JuMPiiN   You shall change your mind ! haha jk, good luc...   Sep 28, 2010 - 8:53 PM
|- - dudeofchaos   QUOTE (JuMPiiN @ Sep 28, 2010 - 8:53...   Sep 29, 2010 - 2:52 PM
- - richee3   The 3S-GE Blacktop BEAMS came in the Toyota Altezz...   Sep 29, 2010 - 4:41 PM
- - JuMPiiN   Exactly what he said above.   Sep 29, 2010 - 4:52 PM
- - BonzaiCelica   probably be better off buying a coroll ae86 and do...   Sep 29, 2010 - 6:21 PM
- - mkernz22   also with the beams, you could turbo it, it wouldn...   Sep 29, 2010 - 7:34 PM
|- - Johnnyny   QUOTE (mkernz22 @ Sep 29, 2010 - 8:3...   Sep 29, 2010 - 7:53 PM
|- - coldbluesteel   QUOTE (mkernz22 @ Sep 29, 2010 - 5:3...   Sep 29, 2010 - 10:29 PM
- - BonzaiCelica   QUOTE (Johnnyny @ Sep 29, 2010 - 8:5...   Sep 29, 2010 - 9:54 PM
- - mkernz22   so i guess i shouldn't have mentioned that lol...   Sep 29, 2010 - 9:56 PM
- - coldbluesteel   Well, I understand exactly where your coming from....   Sep 29, 2010 - 10:25 PM
|- - dudeofchaos   QUOTE (coldbluesteel @ Sep 29, 2010 - 11...   Sep 30, 2010 - 8:12 PM
- - mkernz22   just forget i even mentioned it lol   Sep 29, 2010 - 10:34 PM
|- - SwissFerdi   QUOTE (mkernz22 @ Sep 29, 2010 - 11...   Sep 30, 2010 - 8:45 AM
- - blu94gt   QUOTE (czwalga @ Sep 28, 2010 - 10:0...   Sep 30, 2010 - 1:04 AM
|- - dudeofchaos   QUOTE (blu94gt @ Sep 30, 2010 - 2:04...   Sep 30, 2010 - 8:09 PM
- - azian_advanced   you should definitely join if you haven't alre...   Oct 1, 2010 - 2:36 AM
- - dudeofchaos   QUOTE (azian_advanced @ Oct 1, 2010 - 3...   Oct 1, 2010 - 6:38 PM


Reply to this topicStart new topic
5 User(s) are reading this topic (5 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 23rd, 2024 - 6:14 AM