call me ricy...., but i have a question Options

[96stgreendemon]

so thought about doing something funny, have some old c02 tanks laying around and wonder how i could make a nitrous style puge kit for them, thoughts?

[yarik83]

Stop and think. We do not tolerate people who bash other members. If you have to disagree.. do it without hostility.

This is how you go about doing it:
You need some sort of pressure release system. If you have a tank of filled CO2 then you need a release mechanism that you can pick up at any home depot or similar stores. Something high pressure but not an overkill. It will likely be a manual type mechanism. You can also get a air suspension setup thing going on minus air suspension. You need a tank and a pump (you can even fill it up with air and not co2) and hook all of that to a solenoid that could be operated electronically through a switch. When it turns it releases trapped gas. By volume dynamics you can accelerate it and make it come out faster so your exit pipe will need to be smaller in diameter. you can also purchase a pony scuba tank that will last you a lot longer than a little co2 tank but you will need to pay to fill it up at local scuba store.

http://www.airbagit.com/Default.asp

[czwalga]

Stop and think. We do not tolerate people who bash other members. If you have to disagree.. do it without hostility.

No hostility, just giving a different view point. If he wants to do it fine, just was hoping he'd reconsider.