FS: JDM Tails, Must sell ASAP! Options

[95GTCelica]

I have a pair of JDM tails for sale. I sold my 6gc a long time ago but held on to these in the hopes that someone else might want them. They have the clear corner mod already done to them. The back is sealed very well and I never had problems with condensation. I need to sell these fast. I'm a college student and need money ASAP. Looking for $175 + shipping OBO. I'm located in Canoga Park/Woodland Hills CA if you want local pick-up. Thanks for checkin this out.

[dudeofchaos]

What's the difference between the clear and amber corners? (What do you do to make it clear?) I thought it was only the bulb that made it look clear or amber.

This post has been edited by dudeofchaos: Oct 5, 2010 - 6:43 PM

[DEATH]

What's the difference between the clear and amber corners? (What do you do to make it clear?) I thought it was only the bulb that made it look clear or amber.

Look at the pics of the back - see the white roughly square section of caulk like substance? That is sealing the cut he made to remove the Ambers

[dudeofchaos]

What's the difference between the clear and amber corners? (What do you do to make it clear?) I thought it was only the bulb that made it look clear or amber.

Look at the pics of the back - see the white roughly square section of caulk like substance? That is sealing the cut he made to remove the Ambers

Ohh I see. But how can you ''Remove'' this amber part? Isn'it part of the tail light itself?

[KAOS]

Ohh I see. But how can you ''Remove'' this amber part? Isn'it part of the tail light itself?

Nah - its held in place by a tiny screw, that once removed, allows you to pull the square shaped amber plastic out and reseal the taillight housing...

As for you, DEATH;

...see the white roughly square section of caulk...

Thats what she said...

[dudeofchaos]

Ohh I see. But how can you ''Remove'' this amber part? Isn'it part of the tail light itself?

Nah - its held in place by a tiny screw, that once removed, allows you to pull the square shaped amber plastic out and reseal the taillight housing...

As for you, DEATH;

...see the white roughly square section of caulk...

Thats what she said...

Oh I see. Hmm nice then, you can still have an amber flashing bulb with a total clear tail light
Thanks for the info!

This post has been edited by dudeofchaos: Oct 6, 2010 - 10:29 AM

[KAOS]

Oh I see. Hmm nice then, you can still have an amber flashing bulb with a total clear tail light
Thanks for the info!

Yes and no - once you remove the amber portion of the housing, you'll need to swap out the white oem bulb for an orange one, and in order to keep the clear lens looking clear, you'll need to grab a bulb like this:

[HectortheRican]

Oh I see. Hmm nice then, you can still have an amber flashing bulb with a total clear tail light
Thanks for the info!

Yes and no - once you remove the amber portion of the housing, you'll need to swap out the white oem bulb for an orange one, and in order to keep the clear lens looking clear, you'll need to grab a bulb like this:

That's if you use the USDM harness. If you get the JDM harness, you'll need 7447 bulbs

[dz93]

Oh I see. Hmm nice then, you can still have an amber flashing bulb with a total clear tail light
Thanks for the info!

Yes and no - once you remove the amber portion of the housing, you'll need to swap out the white oem bulb for an orange one, and in order to keep the clear lens looking clear, you'll need to grab a bulb like this:

That's if you use the USDM harness. If you get the JDM harness, you'll need 7447 bulbs

so if i were do buy a set of these lights off suprakid for example, and he said he would remove the amber. exactly, what type of bulb do i need for my lights (non amber).
and what are the harness' if i am interchanging my stock/standard lights to the jdm ones, is there anything i need?