 What the Tuck, Wire Tucking the RC |
 Oct 15, 2010 - 9:48 PM
|
 
|
 Moderator  Joined Apr 17, '03 From Rockland NY Currently Offline Reputation: 15 (100%)  |
Hey guys,
So I decided to start tucking my engine bay. I didn't expect to go as far as I am now, but once I started hiding things, I wanted to hide more & more stuff. I'm not going to the extreme like coomer did, just wanted to clean up the motor a bit. Engine before I started the tuck, it was neat, but I wanted to venture further.  I started with the passenger side, because its the easiest.  I had to remove the fenders, front bumper, and eventually the hood. I will get better pics tomorrow, my camera ran out of battery. Here is a blurry cellphone pic of the frame rail tucked.  I'm happy with the results, then the wiring to the alt and O2 sensor started to annoy me. lol So I jumped in on the drivers side Here is some of the tuck and the relocated fuse box  I can't believe how time consuming this is. I have the engine harness out of the car now, I will rewire the entire harness so I can completely hide it. Blurry pic warning, its getting there.  I still have a ton of work to do on it, consider that the almost half way point, still plenty of things to hide and relocate. I have a feeling I'm gonna pull the engine  I will get some better pics tomorrow. Any suggestions ? DEF --------------------  I will return one day. |
 |
Replies
|
Oct 20, 2010 - 7:19 AM
|
|
 Enthusiast Joined Aug 31, '02 From Philadelphia, PA Currently Offline Reputation: 8 (100%) |
Thats the EB1 plug (if i recall the name correctly). You can cut off the connector and ditch the plug.
http://img.photobucket.com/albums/v139/defgeph/IMG_6678.jpg -------------------- 15PSI - 30MPG - Megasquirt Tuned
|
Posts in this topic
Defgeph What the Tuck Oct 15, 2010 - 9:48 PM
jcbass7 lookin good! Its so easy to get hooked on tuck... Oct 15, 2010 - 9:54 PM njccmd2002 this means your not selling and making a comeback?... Oct 15, 2010 - 11:21 PM jordisonjr I'm curious as to how you did this
I know its ... Oct 16, 2010 - 12:46 AM
Defgeph QUOTE (jordisonjr @ Oct 16, 2010 - 1... Oct 16, 2010 - 9:52 AM whatthe Very nice work will keep an eye out for updates to... Oct 16, 2010 - 5:58 AM presure2 lookin good so far man! Oct 16, 2010 - 10:18 AM Defgeph Passenger side
Drivers side
I have decid... Oct 16, 2010 - 4:35 PM jordisonjr Where did you tuck everything?
Under the frame rai... Oct 16, 2010 - 5:10 PM Defgeph QUOTE (jordisonjr @ Oct 16, 2010 - 6... Oct 16, 2010 - 8:35 PM jordisonjr QUOTE (Defgeph @ Oct 16, 2010 - 8:35... Oct 17, 2010 - 1:09 AM njccmd2002 ^^ i think hes doing a wireless conversion.
n... Oct 16, 2010 - 5:17 PM stl95celica AHHH! ive been wanting to do this. looks great... Oct 16, 2010 - 6:59 PM Defgeph I think I'm going with this filter, small blac... Oct 16, 2010 - 9:11 PM Bigblock -8 AN inside diameter is 7/16 or 1/2 inch. Depend... Oct 16, 2010 - 10:14 PM 95CelicaST Word of advice... since I've been there and do... Oct 17, 2010 - 1:03 AM Johnnyny QUOTE (95CelicaST @ Oct 17, 2010 - 2... Oct 17, 2010 - 1:31 AM 95CelicaST Yeah. I thought I waterproofed mine... Water will ... Oct 17, 2010 - 1:37 AM Johnnyny QUOTE (95CelicaST @ Oct 17, 2010 - 2... Oct 17, 2010 - 2:48 AM hurley97 I don't think Jeff needs to worry about water,... Oct 17, 2010 - 9:11 AM SupraKid QUOTE (hurley97 @ Oct 17, 2010 - 7:1... Oct 17, 2010 - 5:20 PM njccmd2002 Move the fusebox to the trunk? Oct 17, 2010 - 10:18 AM Stambo did you already remove the charcoal canister also? Oct 17, 2010 - 10:42 AM Defgeph Charcoal canister was tossed when I did the swap.
... Oct 17, 2010 - 1:03 PM DEATH Awesome job Jeff - I'm very impressed. I still... Oct 18, 2010 - 8:36 AM Defgeph no rush dude, I wont be done for a while. Oct 18, 2010 - 10:48 AM DEATH Hey bro - one thing I do see - stretching the thro... Oct 18, 2010 - 4:40 PM 95st-celica Hey def, this is gonna look great when its done, h... Oct 18, 2010 - 7:30 PM Defgeph QUOTE (DEATH @ Oct 18, 2010 - 5:40 P... Oct 18, 2010 - 9:24 PM Johnnyny maybe a cover for the fuse box Oct 18, 2010 - 9:51 PM Defgeph one more
Two of the wires were already cut i... Oct 18, 2010 - 11:34 PM presure2 neither of those look like the ALT plug to me, jef... Oct 19, 2010 - 7:56 AM DEATH QUOTE (Defgeph @ Oct 18, 2010 - 9:24... Oct 19, 2010 - 8:51 AM Defgeph Take a pic for me I can receive pics, That cable, ... Oct 19, 2010 - 9:48 AM Defgeph Another one, located in the cabin. I think it has ... Oct 19, 2010 - 10:39 AM stephen_lee the triangle 3pin IS infact the alt plug on a 5th ... Oct 19, 2010 - 11:37 AM presure2 QUOTE (stephen_lee @ Oct 19, 2010 - 12... Oct 19, 2010 - 11:53 AM Defgeph QUOTE (stephen_lee @ Oct 19, 2010 - 12... Oct 19, 2010 - 1:22 PM presure2 QUOTE (Defgeph @ Oct 19, 2010 - 2:22... Oct 20, 2010 - 6:44 AM Defgeph I guess I'll just run two separate looms for t... Oct 20, 2010 - 3:43 PM easternpiro1 def. youre my hero. Oct 20, 2010 - 6:25 PM Defgeph Can somebody take a measurement of the engine bay?... Oct 20, 2010 - 9:32 PM azian_advanced RE: What the Tuck Oct 21, 2010 - 1:10 AM EKAn Any updates? Jan 3, 2011 - 12:20 PM Ted95 QUOTE (EKAn @ Jan 3, 2011 - 12:20 PM... Jan 3, 2011 - 4:43 PM ChfNix QUOTE (Ted95 @ Jan 3, 2011 - 3:43 PM... Jan 4, 2011 - 1:18 PM richee3 ^^^ x4. Feb 6, 2011 - 11:31 PM 95st-celica x5...whats the deal def....i want to see this thin... Feb 7, 2011 - 1:18 AM Defgeph Once spring time gets here, I will finish this pro... Feb 7, 2011 - 9:35 AM Defgeph In the process of gathering all parts needed to fi... Apr 11, 2011 - 11:50 AM Ted95 QUOTE (Defgeph @ Apr 11, 2011 - 12:5... Apr 11, 2011 - 12:23 PM purplegt4 QUOTE (Ted95 @ Apr 11, 2011 - 12:23 ... Apr 11, 2011 - 12:30 PM Ted95 QUOTE (purplegt4 @ Apr 11, 2011 - 1... Apr 11, 2011 - 12:43 PM Defgeph Couldn't find out specs on the filter. Still l... Apr 11, 2011 - 12:29 PM Defgeph Here is a link that can handle 150 PSI of fuel , i... Apr 11, 2011 - 12:39 PM Defgeph QUOTE ya now its just a matter of proper fittings ... Apr 11, 2011 - 1:00 PM Ted95 QUOTE (Defgeph @ Apr 11, 2011 - 2:00... Apr 12, 2011 - 3:20 PM Culpable04 stock fuel pressure is 33 - 38 PSI Apr 11, 2011 - 6:53 PM Defgeph Anyone know the size of the banjo connected to the... Apr 12, 2011 - 9:09 AM CoreyST This looks so good, I can't wait to tuck my wi... Apr 12, 2011 - 12:29 PM Defgeph Its should work just as long as the banjo is neede... Apr 12, 2011 - 4:12 PM presure2 They are all 12x1.25 threads Jeff. Apr 12, 2011 - 5:50 PM Defgeph I might just keep the stock filter and lines for t... Apr 12, 2011 - 6:16 PM Ted95 QUOTE (Defgeph @ Apr 12, 2011 - 7:16... Apr 13, 2011 - 9:58 AM Defgeph Just waiting on parts now. Half the wiring is done... Apr 20, 2011 - 10:59 AM Defgeph Need some help guys, two issues so far
The harnes... May 15, 2011 - 7:15 PM DG_Performance water coolant... the middle 16 pin ecu plug... #4 ... Jun 15, 2011 - 9:26 PM Defgeph Bringing this back from the dead. I can't beli... Jun 4, 2015 - 8:12 PM Batman722 Bout time mang.
Congrats on getting married !
... Jun 4, 2015 - 8:59 PM Defgeph Thanks Dustin!
I will try to get the rest of ... Jun 5, 2015 - 6:01 AM richee3 Awesome to see this thread revived and see you... Jun 5, 2015 - 6:56 AM Smaay the top plug looks like the noise filter that is m... Jun 5, 2015 - 8:48 AM Defgeph Thanks guys. I"m happy to get back in the gam... Jun 5, 2015 - 4:23 PM Defgeph Need a little help with this wire blue with black ... Jun 6, 2015 - 2:47 PM Defgeph Couple more wires that I need help with.
The black... Jun 6, 2015 - 6:22 PM presure2 blast from the past!!!
good to see you... Jun 7, 2015 - 10:48 AM Defgeph To be completely honest Manny. I'm trying to g... Jun 7, 2015 - 11:15 AM lagos Welcome back Jeff.
I haven't looked at this s... Jun 7, 2015 - 12:20 PM Defgeph Thanks Art,
I have 91 3sgte wiring diagram (my e... Jun 7, 2015 - 8:44 PM Defgeph Just an update, I have the harness in starter work... Jun 8, 2015 - 7:32 PM richee3 I'm not sure if you have these or not, but it ... Jun 8, 2015 - 8:29 PM Defgeph Thanks for the link!
I'm down to one code... Jun 11, 2015 - 5:37 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 29th, 2024 - 12:54 PM |