where should i weld my seat belts bar? got a corbeau 4 point seat belt, or i might not need to weld?? Options

[diegohiga]

ok so i got a 4 point racing seat belts for both sides... i did some reserch and people usually weld a bar behind the seats and hold the belts from there... but if i do that ill lose my back seats... there is any other way to install these belts without the bar or any other way that dont block my rear seats or it wont be safe without the bar?

[conus00]

I've had four point in my car for a while. Two reasons:
(1) regular seat belt does not really work/look well with bucket seats
(2) four-point (installed properly) is much better and safer than stock seat belts.

I got my bar off of Ebay but had to modify it (weld "loops" on the top to prevent belts sliding) and also have some nuts welded to the floor for the support bars.
Overall it was worthy every penny. when I strap in, I am, literally, "glued" to the seat.

I will try to take some pics this weekend.

This post has been edited by conus00: Oct 21, 2010 - 10:51 AM