where should i weld my seat belts bar? got a corbeau 4 point seat belt, or i might not need to weld?? Options

[diegohiga]

ok so i got a 4 point racing seat belts for both sides... i did some reserch and people usually weld a bar behind the seats and hold the belts from there... but if i do that ill lose my back seats... there is any other way to install these belts without the bar or any other way that dont block my rear seats or it wont be safe without the bar?

[sphinxxx]

installing those belts the wrong way will hurt you alot more than help you in a crash.
no to mention banging your head off the bars, cause last i checked, i dont know many people who wear helmets while they drive on the street.
http://www.6gc.net/forums/index.php?showtopic=47552

+1 ^

In my honest opinion... and i mean no offense... its your life do with it as you please!

But if you're getting the seat belt harness just to look cool, big mistake!

a 4 point seatbelt harness is not a toy, or a cosmetic mod to look cool!
its a purpose built safety restraint system for track use only!!

do it right or don't bother doing it at all, it may save your life!

thats all i have to say!