DIY - changing your transmission fluid/oil, M/T 7afe |
DIY - changing your transmission fluid/oil, M/T 7afe |
Aug 22, 2005 - 9:16 PM |
|
Enthusiast Joined Mar 8, '04 From Newport, RI Currently Offline Reputation: 63 (99%) |
I changed the transmission fluid/oil in my 7afe recently and Manny (presure2) took some pics - thanks Manny
I was having some slight grinding going into 2nd gear in higher RPMs and I figured changing the tranny fluid would be a great idea. Since it has been changed, no more grinding tools needed : ratchet, 24mm socket, 3-4qts transmission fluid/oil, oil drain pan, jack/stands time : 30min - 1hr, depending on your mechanical skill level DO NOT attempt this when engine is hot, wait until the engine is very cool/cold. first you need to loosen this bolt (fill plug) with a ratchet and the 24mm socket bolt removed it is located here, it is facing the front of the car. The transmission is circled in yellow and the arrow is pointing to the bolt location the bolts are usually very tight and could be difficult to loosen next, jack up the front of the car (putting it on jack stands is always safer) and with the 24mm socket you need to loosen this bolt (drain plug) Remove drain plug. The drain plug is located directly under the transmission. You may need to remove some of the plastic under the engine for easier access. Be sure to put the oil drain pan under the bolt when removing because the old fluid/oil will be pouring out. now after the old oil has drained out (10 min later), replace the drain plug - make sure it is secure - and lower the car. My personal choice Pennzoil Synchromesh pour 3-4qrts of the Synchromesh into the fill plug hole (you might want to use a long funnel or pour/squeeze from the bottle into the hole) until full - it will start pouring back out. I used just less than 3qrts Once full, replace fill plug - make sure it is secure - and wipe up the excess that has spilt. Done. Notes : - be sure to dispose of old fluid/oil properly - according to the BGB - 7a transmission refill = 3.5qrts, 5s transmission refill = 2.6qrts - this procedure should be the same/similar for both 7afe and 5sfe -------------------- |
Oct 27, 2010 - 3:53 AM |
|
Enthusiast Joined Apr 24, '08 From Orange County, CA Currently Offline Reputation: 33 (100%) |
oh WOW! my gear were grinding when I was heel toeing from 3rd to 2nd. and they would also grind when I shifted into 2nd going to the top of 1st gear. I bought 3 quarts of Pennzoil Syncromesh and all the grinding noise was gone. so happy. This saved me the trouble of buying a used transmission
-------------------- Group buy to replicate Narrow E series transaxle parts
http://www.6gc.net/forums/index.php?showto...p;#entry1107514 |
Lo-Fi Version | Time is now: January 12th, 2025 - 3:03 AM |