Mkernz22's Progression Thread Options

[mkernz22]

This is how my story goes. My name is Mike Kern and I live up in MA. I'm only 17 years old and I will be turning 18 in November. This is my second car because I totaled my first one in a snow storm. I'm scared as hell to drive in the snow ever since I lost control and hit a telephone pole. This is my first time ever working on a car this in-depth, and I thought it was going to be really hard to fix, but I took the challenge.
My first car was an Acura Legend. I loved the car for the way it drove. It was just very comfortable and there were a lot of features to the car. That's mainly because it was a luxury car back in the day. The suspension I didn't like because if I took an off ramp at 40mph, the car would nearly tip over because the suspension was that loose. It got up and going very fast, that's because it's a V6 and had 200hp.
My Acura Legend went from this:


To this:

I sold it to some guy for $550 or $500. Not bad I guess.
Then I saved up over a month or two and found this baby on Craigslist for $1500.

^Only upgrade I had in that picture was the aftermarket fogs.
I got the seller down to $1200 so I think it was a steal!
Originally, I was skeptical about getting it cause of the rust, but when I drove it, I knew she was a winner.
My dad didn't want me to get a coupe cause they are not great in the snow, but he could tell I really wanted it.
I had her for a few months, about 4 to 5 I'll say, and I didn't do any upgrades at all to her.
Then, one lovely day on my way to work, disaster struck...


At first, my mom and dad were telling me to scrap her, and I was like no.
I told them about this forum, and how there are so many useful resources, and that I know I can rebuild the front end of her.
So I did, whether they doubted I could do it or not.
It started off with the tear down, which was oh so very fun.




At one point I can say I had a reverse opening hood haha


After that I just kept tearing her down more and more.



Eventually, I got a new window installed and it was free cause insurance covered it.


Then I acquired this bad boy from a guy in Mansfield for $450!



Finally, the two Celicas meet face to semi face lol



I had originally gone to the junk yard to slowly get parts for my car. That is why the red radiator support is on.
Soon after I got the Silver Celica. I spent about $200 there so my total came to $650 for everything.
Slowly, but surely, the swap started progressing!




Just did some mocking up to make sure it was going to be ok.



I got a new exhaust and intake with the car as well!

^Installed

^Not installed yet.

Some pictures of me cutting out the radiator support on the Silver Celica.









Some pictures of me lining the radiator support up onto my car!




I bolted down the radiator support, on both of the sides by the fenders with two bolts and on both the middle legs with a good amount of bolts as well.
I started installing some more parts on the front end little by little.



I also replaced the fuse box cover because it had a decent size hole in it from the crash.



Here is how the front of the car is as of right now. I don't have any recent pictures, but I'll be getting some soon
In the picture the front bumper and hood are just mocked up, nothing is bolted down.




I have some goodies coming my way right now so I'll put them up as I receive them!
Right now I'm saving up for a paint job. I am hoping that will happen in late October or early November.
I'm looking to just get a Midnight Black, but Manny said he might be able to throw a small amount of Blue Pearl in it so it glistens in the sun
I'll keep you all updated!

What I'm so pumped for is that I just convinced my dad that a manual swap will probably cost less than getting tires for the 18" rims off my parts car. WIN!
So that will go down this spring as well as swap out the 5s from the parts car (126k) into my car (214k).
I would love to save for a 3s over the winter, but I think that just learning how to drive stick on an N/A car will be easier.

This post has been edited by mkernz22: Jan 31, 2013 - 8:14 PM

[mkernz22]

To start off, I have to say sorry for the bad quality of the cell phone pictures.

Here is what I put on my car about 2ish weeks ago now, they are CF riser blocks and they look amazing!


As for today, the side skirts that were originally on the parts car went on my car!
It's a bit of a hassle to get them on since you have to drill out the holes.
Overall, it came out good, but when I go to get my car painted (or maybe even before that), I need to patch up a few of the holes I drilled because they were the slightest bit off and that made all the difference when I was putting the skirts on.
On the passenger side there is a gap near the fender because it didn't line up right, I drilled a little too high. In the rear, I drilled a little too low, but no gap
Same goes for the driver side on the rear, but the other mistake was in the middle. It doesn't look bad at all and the gaps aren't noticeable from far away.



I'm really starting to dig the whole black and silver look now. Probably because it cuts from silver to black in a pretty close proportional manner now.
If you look at the pictures, you will see what I mean. Also, I cannot forget about the other present that came for her today!


Rear Splitters! Woo!
The only problem that I am going to have while mounting them is drilling the wholes out in the fiberglass, drilling out the 2 snapped bolts under the bumper (driver side and passenger side) and that's where one of the mounts are for the splitters. Oh yeah, and the muffler is right underneath the passenger side bolt so that will need to come off as well, and on the drivers side, the bottom part of my quarter panel rusted out. There is about a inch and a half long hole now and its about an inch wide. I'm going to cut the panel off the parts car and get it welded onto mine. It's going to be a fun ride putting all those things on haha I just hope its doable!

After work, I'm going to take some pictures and try I'll see if I can get them up tonight!

This post has been edited by mkernz22: Sep 22, 2010 - 3:34 PM

[jcbass7]

Here is what I put on my car about 2ish weeks ago now, they are CF riser blocks and they look amazing!

Those look great on there Mike, I put mine on last weekend and forgot how much of the rear mirror's view it blocks.. (had them on my old hatch few years back) you notice any difficulty seeing out the back now?