Celica/Alltrac/GT4 stuff - interest? Options

[baktasht]

We did some custom work on a local alltrac over the last couple weeks and I wanted to see if you guys would be interested in any of this stuff if we were to make them production items.


* Custom symetrical desing oil catch can & coolant overflow. Oil catch can is built with proper internals (baffled & insulated). The coolant overflow is built as a functional but "stealth" setup. The inlet is at the bottom/front and the outlet is underneath with a long tube welded inside all the way to the top. Kinda hard to explain but you can see it in the pics.












4" intake including the proper ports for the IAC, catchcan, temp sensor (if you want the ports):




Custom wastegate actuator bracket to allow the turbo to be clocked downward:





Custom molded upper radiator hose to delete the ridiculous stock one that has the metal eblow in there, along with a custom nipple to use as your water feed for your turbo (if you still need it).

[presure2]

just like i posted elsewhere, the intake wont fit on a 6gc with cruise or a battery in the stock location, the catch cans are in the fuse box and ABS locations.

[baktasht]

just like i posted elsewhere, the intake wont fit on a 6gc with cruise or a battery in the stock location, the catch cans are in the fuse box and ABS locations.

One glance at an engine bay and I think that's a given. Certain items fit with certain components. Certain items don't. We've already made the custom brackets to relocate the fusebox & relaybox as pictured above. Most guys are relocating their batteries to the rear already, and if there are folks that want to keep their battery in the front, we can make an intake that will fit for those folks as well.

[presure2]

just like i posted elsewhere, the intake wont fit on a 6gc with cruise or a battery in the stock location, the catch cans are in the fuse box and ABS locations.

One glance at an engine bay and I think that's a given. Certain items fit with certain components. Certain items don't. We've already made the custom brackets to relocate the fusebox & relaybox as pictured above. Most guys are relocating their batteries to the rear already, and if there are folks that want to keep their battery in the front, we can make an intake that will fit for those folks as well.

i understand that, but, the "relocation" of parts on a 5th gen isnt the same as a 6gc, our engine bays are layed out a bit diffrently,(ie fuse boxes are in diffrent locations, ect) and i was just making sure you were aware.