zake's progression thread, UPDATED 5/16/12 |
zake's progression thread, UPDATED 5/16/12 |
Mar 11, 2010 - 11:53 PM |
|
Enthusiast Joined Mar 7, '10 From Ft. Lauderdale Currently Offline Reputation: 9 (100%) |
this will be the thread that il post the progress of my 96' celica as it comes along.
here is some pics of the car as it was in march-2010 when i got the car, the dash lights were burnt out, soo i fixed it. then i went to cleaning the inside. (previous owner left it horrific..) while i was doing that, i decided to de-badge the rear right after i took them off (un-cleaned) and after i cleaned it up i think this would be a nice spot for the now "homeless" badges (please excuse the dirty carpet in the trunk, when i vacuumed, it wasn't in the car) This post has been edited by Zake: May 16, 2012 - 10:02 PM -------------------- |
Nov 7, 2010 - 9:24 PM |
|
Enthusiast Joined Mar 7, '10 From Ft. Lauderdale Currently Offline Reputation: 9 (100%) |
I added fogs to her today. when I bought the car last march, the girl i bought it from said that the week before, the passenger side fog fell out somewhere and got lost. and the drivers side one had a hole in the glass on the bottom, so i took it off. last night after the midwest meet, i went to walmart and picked up some cheap fogs. they dont look bad. i had to mess around with the wiring to connect them to the stock wires, but all is good. i was originaly going to use the wires that came with the fogs, but look at the positive wire... about 7 feet too short? these are the fogs my one and only oem broken fog i cut he plug off of the oem fog, and put it on the new fog wires. (it has heat shrink tubing covering it now) for the other side, i just cut the plug off from the car and hooked the wires together. so the driver side is removable, but the passenger side isn't. This post has been edited by Zake: Nov 7, 2010 - 9:25 PM -------------------- |
Lo-Fi Version | Time is now: November 23rd, 2024 - 8:46 AM |