 Shaky steering wheel/cock pit on idle |
 Nov 5, 2010 - 9:43 PM
|
 
|
 Enthusiast  Joined Dec 9, '08 From Blainville Currently Offline Reputation: 4 (100%)  |
When the car is on idle the rpm drops down to around 800. Then the steering wheel starts to shake a little, not much, but just enoght to be annoying.
Also I can feel the interior shake a little bit too, almost like it wants to stall but it's not as noticable as the steering wheel. Pretty much like releasing the clutch just a little without giving any gas. What could cause that? I thought of maybe a bushing somewhere in the steeering parts? |
 |
Replies
|
Nov 9, 2010 - 9:32 PM
|
|
 Enthusiast Joined Mar 8, '08 From Orlando, Florida Currently Offline Reputation: 14 (100%) |
possibly motor mounts busted.
-------------------- ◊◊◊ My F/S Thread! ◊◊◊
QUOTE (14:19:21) Daniel: That was a JDM hole in the side of the box too. There was so much JDM trapped inside that box that they couldn't contain it, so they had to put a JDM hole in the box to let the JDM out. QUOTE Ferdi says (11:29) No, it looks like a hooker put her acid vag on your hood. Acid vag = bigger problem than a few dings. |
Posts in this topic
dudeofchaos Shaky steering wheel/cock pit on idle Nov 5, 2010 - 9:43 PM
HectortheRican Mine does that too at about 750rpm. I'm not ex... Nov 5, 2010 - 9:44 PM al94st try disconnecting your battery and reconnecting to... Nov 5, 2010 - 9:53 PM 4-eyed-freek mine is auto and it does the same thing. 4 cylinde... Nov 5, 2010 - 9:55 PM HectortheRican I already reset my ECU. It didn't make a diffe... Nov 6, 2010 - 2:40 AM
fgvillegas is the idle speed too low? this could be the reaso... Nov 9, 2010 - 2:56 AM str8thugginit4ya QUOTE (samir0189 @ Nov 9, 2010 - 10... Nov 9, 2010 - 11:12 PM samir0189 QUOTE (str8thugginit4ya @ Nov 9, 2010 - ... Nov 10, 2010 - 11:00 AM fgvillegas are the motor mounts that you installed are the so... Nov 9, 2010 - 11:35 PM Hanyo sounds like your car just needs a tune up.
when ... Nov 10, 2010 - 4:00 AM HectortheRican QUOTE (Hanyo @ Nov 10, 2010 - 4:00 A... Nov 10, 2010 - 8:55 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: January 10th, 2025 - 10:13 PM |